This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Securities Exchange Act of 1934 and the Securities Act of 1933, which are subject to known and unknown risks and uncertainties. The forward-looking statements include statements concerning, among other things, our business strategy (including the influence of anticipated trends and developments in our business and the markets in which we operate), financial results, operating results, revenues, gross margin, operating expenses, products, projected costs and capital expenditures, research and development programs, sales and marketing initiatives, acquisitions and competition. In some cases, you can identify these statements by our use of forward-looking words, such as “may,” “might,” “will,” “could,” “should,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “intend” and “continue,” the negative or plural of these words and other comparable terminology. Forward-looking statements are based on information available to us as of the filing date of this Annual Report on Form 10-K and our current expectations about future events, which are inherently subject to change and involve assumptions and known and unknown risks and uncertainties. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. In light of these risks, uncertainties and assumptions, you should not place undue reliance on these forward-looking statements. We have no obligation to update any of these statements, and we assume no obligation to do so. Actual events or results may differ materially from those expressed or implied by these statements due to various factors, including but not limited to the matters discussed below in the section entitled “Item 1A: Risk Factors,” and elsewhere in this Annual Report on Form 10-K. This Form 10-K also contains estimates, projections and other information concerning our industry, our business, and the markets for certain of our products, including data regarding the estimated size of those markets. Information that is based on estimates, forecasts, projections, market research or similar methodologies is inherently subject to uncertainties and actual events or circumstances may differ materially from events and circumstances reflected in this information. Unless otherwise expressly stated, we obtained this industry, business, market, and other data from reports, research surveys, studies, and similar data prepared by market research firms and other third parties, industry, general publications, government data, and similar sources.

PART I

Item 1. Business.

Cohu is a global technology leader supplying test, automation, inspection and metrology products and services to the semiconductor industry. Cohu’s differentiated and broad product portfolio is designed to optimize semiconductor manufacturing yield and productivity, accelerating customers’ time-to-market. We offer a wide range of products and services, and revenue from our capital equipment products is driven by the capital expenditure budgets and spending patterns of our customers, who often delay or accelerate purchases in reaction to variations in their business. The level of capital expenditures by these companies depends on the current and anticipated market demand for semiconductor devices and the products that incorporate them. Our recurring revenues are driven by an increase in the number of semiconductor devices that are tested and by the continuous introduction of new products and technologies by our customers.

MCT Worldwide, LLC (“MCT”), acquired by Cohu on January 30, 2023, is a United States (“U.S.”) based company with a principal manufacturing site in Penang, Malaysia. MCT provides automated solutions for the semiconductor industry and designs, manufactures, markets, services and distributes strip test handlers, film frame handlers and laser mark handlers. The acquisition of MCT was completed subsequent to Cohu’s fiscal year ended December 31, 2022 and certain disclosures include MCT to enable investors to evaluate the operating and financial effects to our business recognized in the subsequent accounting period. Unless otherwise indicated, disclosures made throughout this Form 10-K exclude the effect of the acquisition of MCT.

On June 24, 2021, we completed the sale of our PCB Test Equipment (“PCB Test”) business, that represented the entirety of our PCB Test reportable segment. As part of this divestiture, we also sold certain intellectual property held by our Semiconductor Test & Inspection segment that was used by the PCB Test business. Unless otherwise noted, all amounts presented are from continuing operations.

We have determined that we have one reportable segment, Semiconductor Test and Inspection Equipment (“Semiconductor Test & Inspection”). Prior to the sale of our PCB Test Group (“PTG”) on June 24, 2021, we reported two segments, Semiconductor Test & Inspection and PCB Test Equipment. Financial information on our reportable segments for each of the last three years is included in Note 10, “Segment and Geographic Information” in Part IV, Item 15(a) of this Form 10-K.

Sales by reportable segment, expressed as a percentage of total consolidated net sales, for the last three years were as follows:

Cohu, Inc. (“Cohu”, “we”, “our”, “us” and the “Company”) was incorporated under the laws of California in 1947, as Kalbfell Lab, Inc. and commenced active operations in the same year. Our name was changed to Kay Lab in 1954. In 1957, Cohu was reincorporated under the laws of the State of Delaware as Cohu Electronics, Inc. and in 1972 our name was changed to Cohu, Inc.

Our Products

We currently sell the following products:

Semiconductor Automated Test Equipment (“ATE”) is used both for wafer level and device package testing. Our semiconductor ATE solutions consist primarily of two platforms for the system on a chip (“SoC”) device market. The Diamondx tester offers high-density instrumentation for testing microcontrollers, application specific standard products (“ASSP”), power management, display drivers, sensors and other mixed signal devices. The PAx tester is focused primarily on the RF Front End IC and Module applications.

Semiconductor Handlers are used in conjunction with semiconductor ATE to automate the testing of packaged semiconductor devices. Our handlers support a variety of package sizes and device types, including those used in automotive, mobility, industrial and computing applications, among others. We offer a broad range of test handlers, including pick-and-place, turret, gravity, strip, film frame, laser mark, MEMS and thermal sub-systems.

Interface Products are comprised of test contactors, probe heads and probe pins. Test contactors serve as the interface between the test handler and the semiconductor device under test such as digital semiconductor devices utilizing spring probe technology, power management and LED semiconductor devices utilizing cantilever technology, and RF semiconductor devices based on contacts designed to operate at high frequencies. Test contactors and probe heads are specific to individual semiconductor device designs, need to be replaced frequently and increase in size with the number of devices tested in parallel. Interface Products are included in our recurring revenues.

Inspection and Metrology are products that provide advanced vision capabilities. We offer a wide range of solutions for inspection of singulated molded leaded and leadless devices, and post-singulated wafer level chip scale packages (“WLCSP”) and bare dies. NV-Core is our unique vision technology, enabling advanced inspection and metrology, such as 3-dimensional topographic inspection, sidewall micro-crack detection, and infrared inspection for sub-surface defect detection.

Data Analytics (“DI-Core”) is a comprehensive software suite used to optimize Cohu equipment performance. DI-Core provides real-time online performance monitoring and process control to improve utilization, manage predictive maintenance, and link semiconductor tester, handler and test contactor data. DI-Core is included in our recurring revenue.

Spares and Kits are consumable, non-consumable and spare items that are used to maintain, sustain or otherwise enable customers’ equipment to meet its performance, availability and production requirements. We also design and manufacture a wide range of device dedication kits that enable handlers to process different semiconductor packages. Spares and Kits are included in our recurring revenues.

Services are provided by our worldwide service organization and include installations and necessary maintenance of systems sold. We provide various parts and labor warranties on test and handling systems and instruments designed and manufactured by us. We also provide training on the maintenance and operation of our systems as well as application, data management software and consulting services on our products. Services are included in our recurring revenues.

Sales by Product Line

During the last three years, our consolidated net sales were distributed as follows:

Customers

Our customers include semiconductor integrated device manufacturers, fabless design houses, and test subcontractors throughout the world. Repeat sales to existing customers represent a significant portion of our sales. During the last three years, customers of our Semiconductor Test & Inspection segment that comprised 10% or greater of our consolidated net sales were as follows:

The loss of, or a significant reduction in, orders by these or other significant customers, including reductions due to market, economic or competitive conditions or the outsourcing of final integrated circuit test to subcontractors that are not our customers, would adversely affect our financial condition and results of operations.

On June 24, 2021, we completed the divestment of our PCB Test business. No customer of our PCB Test segment exceeded 10% of consolidated net sales for the years ended December 25, 2021 or December 26, 2020.

Additional financial information on revenues from external customers by geographic area for each of the last three years is included in Note 10, “Segment and Geographic Information” in Part IV, Item 15(a) of this Form 10-K.

Sales and Marketing

We market our products worldwide through a combination of a direct sales force and independent sales representatives. In geographic areas where we believe there is sufficient sales potential, we generally employ our own personnel. Our U.S. sales offices are located in Poway and Milpitas, California, St. Paul, Minnesota, Lincoln, Rhode Island, Norwood, Massachusetts and, subsequent to our recent acquisition of MCT on January 30, 2023, Minneapolis, Minnesota. Our European sales offices are located in Kolbermoor, Germany; Grenoble, France; Agrate, Italy and La Chaux-de-Fonds, Switzerland. We operate in Asia with sales and service offices in Singapore, Malaysia, Thailand, Philippines, Taiwan, China, South Korea and Japan.

Competition

The semiconductor equipment industry is intensely competitive and is characterized by rapid technological change and demanding worldwide service requirements. Significant competitive factors include product performance, price, reliability, lead-time, customer support and installed base of products. While we believe that we are the leading worldwide supplier of semiconductor test handling equipment, we face substantial competition in Japan and Taiwan which represent a significant percentage of the worldwide market. Test subcontractors in Asia also show preference to purchase from local Asian competitors. In the semiconductor ATE market, we face competition from two dominant suppliers headquartered in the U.S. and Japan, both of which are substantially larger than Cohu’s test business. While we are among the leading worldwide suppliers of test contactors, this market is fragmented with a large number of global and local competitors. To remain competitive within the industries we serve, we believe we will require significant financial resources to offer a broad range of products, maintain localized customer support and service centers worldwide, and to invest in research and development of new products. Failure to introduce new products in a timely manner or the introduction by competitors of products with actual or perceived advantages could result in a loss of competitive position and reduced sales of existing products. No assurance can be given that we will continue to compete successfully throughout the world.

Backlog

Our backlog of unfilled orders for products, was $279.8 million at December 31, 2022 and $292.9 million at December 25, 2021.

Backlog is generally expected to ship within the next twelve months. Our backlog at any point in time may not be representative of actual sales in any future period due to the possibility of customer changes in delivery schedules, cancellation of orders, potential delays in product shipments, and difficulties in obtaining parts from suppliers or failure to satisfy customer acceptance requirements resulting in the inability to recognize revenue under accounting requirements. Furthermore, many orders are subject to cancellation or rescheduling by the customer with limited or no penalty. A reduction in backlog during any period could have a material adverse effect on our business, financial condition, and results of operations.

Manufacturing and Raw Materials

Our principal manufacturing operations are currently located in Malacca, Malaysia and subsequent to our acquisition of MCT on January 30, 2023, Penang, Malaysia (handler operations and kits); Laguna, Philippines (kits and test contactors); Lincoln, Rhode Island (connectors); and Osaka, Japan (probe pins).

We outsource the manufacturing of many of our semiconductor automated test equipment products to Jabil Circuit, Inc.’s facility in Penang, Malaysia. Our sole source contract manufacturing partner is responsible for significant material procurement, assembly and test. We continue to manage product design through pilot production for the subcontracted products, and we are directly involved in qualifying suppliers and key components used in all our products. Our contract manufacturer is responsible for funding the capital expenses incurred in connection with the manufacture of our products, except with regard to end-of-line testing equipment and other specific manufacturing equipment utilized in assembling our products or sub-components which are financed and owned by Cohu.

Many of the components and subassemblies we utilize are standard products, although some items are made to our specifications. Certain components are obtained or are available from a limited number of suppliers or may be sole supplier sourced. We seek to reduce our dependence on sole and limited source suppliers, however in some cases the complete or partial loss of certain of these sources could have a material adverse effect on our operations while we attempt to locate and qualify replacement suppliers.

Patents and Trademarks

Our technology is protected by various intellectual property laws including patent, license, trademark, copyright and trade secret laws. In addition, we believe that, due to the rapid pace of technological change in the semiconductor and electronic equipment industries, the successful manufacture and sale of our products also depends upon our experience, technological know-how, manufacturing and marketing skills and speed of response to sales opportunities. In the absence of patent protection, we would be vulnerable to competitors who attempt to copy or imitate our products or processes. We believe our intellectual property has value, and we have in the past and will in the future take actions we deem appropriate to protect such property from misappropriation. However, there can be no assurance such actions will provide meaningful protection from competition. Protecting our intellectual property rights or defending against claims brought by other holders of such rights, either directly against us or against customers we have agreed to indemnify, would likely be expensive and time consuming and could have a material adverse effect on our operations.

Research and Development

Research and development activities are carried on in our various subsidiaries and are directed toward development of new products and equipment, as well as enhancements to existing products and equipment. Our total research and development expense was $92.6 million in 2022, $92.0 million in 2021 and $86.2 million in 2020.

We work closely with our customers to make improvements to our existing products and in the development of new products. We expect to continue to make significant investments in research and development and must manage product transitions successfully as introductions of new products could adversely impact sales.

Seasonality

Historically, the semiconductor industry has been seasonal with recurring periods of oversupply and excess capacity, which often have had a significant effect on the semiconductor industry’s demand for capital equipment, including equipment of the type we manufacture and market. We anticipate that the markets for newer generations of semiconductors and semiconductor equipment will be subject to similar cycles. See the risk factor entitled “The semiconductor industry we serve is seasonal, volatile and unpredictable, and increased cyclicality could have an adverse impact on our sales and gross margin.”

Information About Our Executive Officers

The following sets forth the names, ages, positions and offices held by all executive officers of Cohu as of February 8, 2023. Executive Officers serve at the discretion of the Board of Directors, until their successors are appointed.

Dr. Müller has been the President and Chief Executive Officer of Cohu since December 28, 2014. His previous roles at Cohu include serving as President of Cohu’s Semiconductor Equipment Group (“SEG”) from 2011 to 2014; Managing Director of Rasco GmbH (“Rasco”) from 2009 to 2010; Vice President of Delta Design’s High Speed Handling Group from 2008 to 2010; and Director of Engineering at Delta Design from 2005 to 2008. Prior to joining Cohu, Dr. Müller spent nine years at Teradyne Inc., where he held management positions in engineering and business development. Dr. Müller also serves as a director for Celestica Inc., a solutions-based company providing design, manufacturing and hardware platform and supply chain solutions.

Mr. Jones joined Cohu’s Delta Design subsidiary in July 2005 as Vice President Finance and Controller. In November 2007, Mr. Jones was named Vice President, Finance and Chief Financial Officer of Cohu, and was subsequently promoted on February 3, 2022 to Senior Vice President, Finance and Chief Financial Officer. Prior to joining Delta Design, Mr. Jones, was Vice President and General Manager of the Systems Group at SBS Technologies, Inc., a designer and manufacturer of embedded computer products. Prior to SBS Technologies, Mr. Jones was an Audit Manager for Coopers & Lybrand (now PricewaterhouseCoopers).

Mr. Bohrson was promoted to Senior Vice President and Chief Customer Officer on February 2, 2023, and prior to that he served as Senior Vice President, Global Customer Group since February 8, 2021. Previously, Mr. Bohrson served as Sr. Vice President and General Manager, Test Handler Group beginning in October 2018 and was Vice President and General Manager for Digital Test Handlers from January 2017 until October 2018 and served as Vice President Sales and Service, Americas from May 2016 to January 2017. Prior to joining Cohu, from 2007 through 2016, Mr. Bohrson held several executive positions at Bosch Automotive Service Solutions/SPX lastly as Vice President and General Manager of the OEM Diagnostics and Information Solutions group. Prior to that, Mr. Bohrson spent twenty years working in a variety of management and technical roles at Teradyne, Inc.’s semiconductor and broadband test division in the U.S. and Asia.

Mr. Kampfer joined Cohu in May 2017 as Vice President Corporate Development, General Counsel and Secretary. Prior to Cohu, Mr. Kampfer served from June 2015 to May 2017 as Executive Vice President and Chief Financial Officer of Multi-Fineline Electronix, Inc. Prior to that, Mr. Kampfer served from 2012 to 2015 as President of CohuHD, formerly a division of Cohu, which was divested in 2014. Previously, Mr. Kampfer spent eight years with Iomega Corporation, holding several executive positions, including President and Chief Operating Officer and Vice President, General Counsel and Secretary. Earlier, Mr. Kampfer served in various legal and business development executive roles with Proxima Corporation, and also held various positions in manufacturing engineering and legal at IBM.

Mr. Lawee joined Cohu in May 2019 as Vice President and General Manager of Cohu’s Semiconductor Test Group and was subsequently promoted to Senior Vice President and General Manager on February 9, 2021. Mr. Lawee has more than twenty-five years of experience in multiple management positions at both semiconductor and test instrumentation companies. Between 2009 and 2019, he served in multiple General Manager and Senior Director roles at Analog Devices, with responsibilities spanning Interface, Isolation and Precision Converter semiconductor franchises, as well as Business Unit responsibility for semiconductors sold into the Energy market. Prior to that, Mr. Lawee spent fifteen years working in a variety of product, marketing and engineering management roles at Teradyne’s semiconductor test division.

Governmental Regulations

Our business activities are worldwide and are subject to various federal, state, local, and foreign laws and our products and services are governed by a number of rules and regulations. Costs incurred to comply with these governmental regulations are presently not material to our capital expenditures, results of operations and competitive position. Although there is no assurance that existing or future government laws applicable to our operations, services or products will not have a material adverse effect on our capital expenditures, results of operations or our competitive position, we do not currently anticipate material expenditures for government regulations.

Environmental

Our products and operations are, or may in the future be, subject to various federal, state, local, and foreign laws and regulations concerning the environment. Compliance with federal, state, local and international laws that have been enacted or adopted regulating the discharge of materials into the environment or otherwise relating to the protection of the environment and the prevention of climate change have not had a material effect and are not expected to have a material effect upon our capital expenditures, results of operations or our competitive position. However, future changes in regulations may require expenditures that could adversely impact earnings in future years. We believe we are in compliance and are committed to maintaining compliance with all environmental laws applicable to our operations, products and services, and to reducing our environmental impact across all aspects of our business.

Global Trade

As a global company, the import and export of our products and services are subject to laws and regulations including international treaties, U.S. export controls and sanctions laws, customs regulations, and local trade rules around the world. We believe we are in compliance and are committed to maintaining compliance with all global trade laws applicable to our operations, products and services.

Human Capital Management

Cohu is a global technology leader supplying test, automation, inspection and metrology products and services to the semiconductor industry. We believe that the daily commitment and dedication of our workforce in meeting our customers’ needs is one of the significant contributors to our success as an organization. To ensure we maintain our position as a global leader in the semiconductor test and inspection space, we are committed to providing a safe and positive work environment for our employees that emphasizes learning and professional development, respect for individuals and ethical conduct, and that is facilitated by a direct management-employee engagement model.

Diversity, Inclusion, and Non-discrimination

We welcome and value diversity ensuring that our work benefits from a broad range of viewpoints and perspectives. We strive to maintain workplaces that are free from discrimination or harassment based on race, color, religion, gender, gender identity or gender expression, national origin or ancestry, age, disability, veteran status, military service, sexual orientation, genetic information, and any other protected category recognized under applicable laws. We believe that a diverse workforce is critical to our success, and we continue to focus on the hiring, retention and advancement of women and underrepresented populations. We are committed to respecting and protecting the human rights of all our employees.

Employees

Including headcount additions arising from our acquisition of MCT, as of January 30, 2023, we had approximately 3,218 employees, including approximately 104 temporary employees, in 24 countries. Approximately 19% of our employees are located in the Americas, 13% are located in EMEA (Europe, the Middle East and Africa) and 68% are located in Asia Pacific. Our employee headcount has fluctuated in the last five years primarily due to the volatile and unpredictable business conditions in the semiconductor equipment industry and has also been impacted by acquisitions and divestitures.

Management Engagement Practices

We adhere to our core values and Code of Business Conduct and Ethics with a commitment to treating our employees and all our partners with professionalism, dignity and respect. We pride ourselves at fostering an innovative environment and collaborative work relationships. This includes respecting principles of freedom of association and the right to engage in collective bargaining in accordance with applicable laws.

Our employees in the U.S. and most locations in Asia are not covered by collective bargaining agreements. However, certain employees at our operation in Germany are represented by a works council and employees in La Chaux-de-Fonds, Switzerland are members of the microtechnology and Swiss watch trade union. The Collective Bargaining Agreement of “Metallurgie (ingenieurs et cadres)” is applicable to all employees of our French subsidiary and certain employees in our China operation belong to local trade unions. We have not experienced any work stoppages and consider relations with our employees to be good.

Health and Safety

The health and safety of our employees is of utmost important to us. Cohu works to protect the health and safety of employees and our customers and intends to conduct all business activities in an environmentally and socially responsible manner. We encourage and strive to have every employee actively champion those behaviors and the attitudes necessary to prevent work-related injuries, illnesses, property damage, and adverse impact to the environment. Our ultimate goal is to achieve a level of work-related injuries as close to zero as possible through continuous investment in our safety programs. We provide protective equipment (e.g., eye protection, masks and gloves) as required by applicable standards and as appropriate given employee job duties.

In response to the COVID-19 pandemic, we implemented safety protocols and new procedures to protect our employees, our subcontractors and our customers. These protocols include complying with physical distancing, enhanced hygiene and other health and safety standards as required by federal, state and local government agencies, and taking into consideration guidelines of the Centers for Disease Control and Prevention and other public health authorities. In addition, we modified the way we conduct many aspects of our business to reduce the number of in-person interactions. For example, we significantly expanded the use of virtual interactions in all aspects of our business, including customer facing activities. Many of our administrative and operational functions during this time have required modification as well, including segments of our workforce working remotely. As COVID-19 has evolved to a more endemic state, we have continued monitoring and complying with governmental guidelines for safe operations and have returned, but not fully, to the levels of travel and in person interactions that occurred prior to the pandemic. In addition, while our manufacturing sites have continued at pre-pandemic occupancy and function, a portion of our employees that moved to remote work are continuing in fully remote or hybrid work status.

Compensation and Benefits

Cohu is committed to providing market competitive compensation programs to attract, retain and motivate a high performing workforce critical to our long-term success. As part of our compensation philosophy, we focus Cohu’s workforce on our financial and other business goals to drive and motivate employee performance in key areas through the administration of our management incentive plan, equity incentive plan, global profit-sharing and other local bonus plans, as may be applicable to a given position. Cohu also complies with applicable wage, work hours, overtime and benefits laws.

To foster a stronger sense of ownership and align the interests of our employees with shareholders, grants of restricted stock units are provided to many of our employees on an annual basis and all eligible employees are able to purchase shares of our common stock, at a 15% discount, through our Employee Stock Purchase Plan. Furthermore, we offer comprehensive, locally relevant and innovative benefits to all eligible employees. In the U.S, these include, among other benefits:

Outside of the U.S., we have provided other innovative benefits to help address market-specific needs, such as supplemental medical coverage or reimbursements, paid time off programs, wellness and development events and programs, transportation subsidies, etc.

Succession Planning

We perform succession planning annually to ensure that we develop and sustain a strong bench of talent capable of performing at the highest levels. Not only is talent identified, but potential paths of development are discussed to ensure that employees have an opportunity to build their skills and are well-prepared for future roles. The strength of our succession planning process is evident through our long history of promoting our leaders from within the organization, including 63% of our current executive leadership team.

Available Information

Our web site address is www.cohu.com. We make available free of charge, on or through our web site, our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports, as soon as reasonably practicable after such material is electronically filed with the Securities and Exchange Commission (the “SEC”). Our Code of Business Conduct and Ethics and other documents related to our corporate governance are also posted on our web site at https://cohu.gcs-web.com/corporate-governance/documents-charters. When required by the rules of the Nasdaq Stock Market, LLC (“Nasdaq”), or the SEC, we will disclose any future amendment to, or waiver of, any provision of the code of conduct for our chief executive officer and principal financial officer or any member or members of our board of directors on our website within four business days following the date of such amendment or waiver. Information contained on our web site is not deemed part of this report.

Item 1A. Risk Factors.

In addition to the other information in this Annual Report on Form 10-K, you should carefully consider the risk factors discussed in this Annual Report on Form 10-K in evaluating Cohu and our business (the “risk factors”). If any of the identified risks actually occur, our business, financial condition and results of operations could be materially adversely affected, the trading price of our common stock could decline, and you may lose all or part of your investment in our common stock. The risks and uncertainties described in this Annual Report on Form 10-K are not the only ones we face. Additional risks that we currently do not know about, or that we currently deem to be immaterial, may also impair our business operations or the trading price of our common stock.

Risk Factors Summary

Investing in our securities involves a high degree of risk. The following is a summary of the principal factors that make an investment in our securities speculative or risky, all of which are more fully described below. This summary should be read in conjunction with the full “Risk Factors” described below and should not be relied upon as a complete summary of the material risks facing our business.

Risks Relating to the COVID-19 Pandemic

Risks Relating to Our Business Operations and Industry

Risks Associated with Operating a Global Business

Risks Relating to Acquisitions and Other Strategic Transactions

Risks Relating to Owning Our Stock

Risks Relating to Cybersecurity, Intellectual Property and Litigation

For a more complete discussion of the material risks facing our business, see below.

Risks Relating to the COVID-19 Pandemic

While the ongoing global COVID-19 pandemic has stabilized within many global regions, it may cyclically continue to adversely affect our business, financial condition and results of operations.

The ongoing global COVID-19 pandemic and its related macroeconomic effects have adversely affected, and may continue to adversely affect, our business, financial condition and results of operations in a cyclical manner. As the COVID-19 virus has evolved from March 2020 to the present, with subsequent variants emerging, authorities have implemented numerous measures to try to contain the virus, such as travel bans and restrictions, quarantines, shelter in place orders, vaccine mandates, and shutdowns, including at various times in all of the jurisdictions where we operate. These measures have adversely impacted, and may continue to adversely impact, our workforce and operations, the operations of our customers, and those of our respective vendors and suppliers. We have significant operations in the U.S., Germany, Switzerland, Malaysia, Japan and the Philippines, and each of these countries has been significantly affected by the COVID-19 outbreak. During the COVID-19 pandemic, it has been common for restrictions to be implemented, relaxed and then implemented again with little or no notice, which adversely impacts our ability to accurately predict our future revenue and budget future expenses and is disruptive to our operations.

Although we believe that Cohu qualifies as an “essential business” in the jurisdictions in which we operate, our business has been, and may in the future be, adversely impacted by evolving and extended public health requirements around the world; government-mandated facility shutdowns; import/export, shipping and logistics disruptions and delays; other supply chain and distribution constraints or delays; rapid changes to business, political or regulatory conditions affecting the semiconductor equipment industry and the overall global economy; availability of employees, increased sick time and lost employee productivity; risks associated with, at times, temporarily housing employees in our Malaysia and Philippines factories; remote working IT and increased cybersecurity risks; increased internal control risks over financial reporting as key finance staff work remotely; delayed product development programs; customers’ canceling, pushing out orders or refusal to accept product deliveries; delayed collection of receivables; other actions of our customers, suppliers and competitors which may be sudden and inconsistent with our expectations; higher shipping, trucking and logistics costs; higher component costs; manufacturing capacity limitations; additional credit rating agency downgrades could occur which would increase our cost of raising capital; and potential additional impairment of goodwill or other intangible assets or inventory write-downs due to lower product demand may become necessary. Any of the foregoing COVID-19 driven impacts, if they reoccur, may have a material adverse effect on our financial condition and results of operations, and may also have the effect of increasing the likelihood and/or magnitude of other risks described in these risk factors. With any successive COVID-19 surge, we believe the risks of material adverse business disruption increase. We continuously monitor and react to the pandemic but cannot predict its future course or impacts.

Risks Relating to Our Business Operations and Industry

We are making investments in new products and product enhancements, which may adversely affect our operating results; these investments may not be commercially successful.

Given the highly competitive and rapidly evolving technology environment in which we operate, we believe it is important to develop new and enhanced product offerings to meet strategic opportunities as they evolve. This includes developing products that we believe are necessary to meet the future needs of the marketplace and to enter new markets. We are currently significantly investing in new product development programs relating to test contactors, test handlers and automated test equipment. In fiscal 2022, we incurred $92.6 million in research and development expenses. We expect to continue to make investments and we may, at any time, based on product need or marketplace demand, decide to significantly increase our product development expenditures in these or other products. The cost of investments in new product offerings and product enhancements can have a negative impact on our operating results. We have in the past made material investments in new product platforms that for various reasons, such as technical challenges or lack of customer adoption, have not generated the expected sales or return. There can be no assurance that other new products we develop will be accepted in the marketplace or generate material revenues for us.

We have manufacturing operations in Asia. Any failure to effectively manage multiple manufacturing sites and to secure raw materials meeting our quality, cost and other requirements, or failures by our suppliers to perform, could harm our sales, service levels and reputation.

A substantial majority of our products are manufactured in Asia. Our reliance on overseas manufacturers exposes us to significant risks including complex management, foreign currency, legal, tax and economic risks, which we may not be able to address quickly and adequately. In addition, it is time consuming and costly to qualify overseas supplier relationships. If we should fail to effectively manage overseas manufacturing operations or logistics, or if one or more of them should experience delays, disruptions or quality control problems, or if we had to change or add additional manufacturing sites, our ability to ship products to our customers could be delayed. Also, the addition of overseas manufacturing locations increases the demands on our administrative and operations infrastructure and the complexity of our supply chain management and logistics. Our overseas sites are more susceptible to impacts from natural disasters, health epidemics and geopolitical instability (see risk factors entitled “While the ongoing global COVID-19 pandemic has stabilized within many global regions, it may cyclically continue to adversely affect our business, financial condition and results of operations” and “The occurrence of natural disasters, health epidemics, corruption and geopolitical instability caused by terrorist attacks and other threats may adversely impact our operations and sales”). If our overseas manufacturing locations are unable to meet our manufacturing requirements in a timely manner, our ability to ship products and to realize the related revenues when anticipated could be materially affected.

Our suppliers are subject to the fluctuations in general economic cycles, and global economic conditions may impact their ability to operate their businesses. They may also be impacted by possible import, export, tariff and other trade barriers, increasing costs of raw materials, labor and distribution, resulting in demands for less attractive contract terms or an inability for them to meet our requirements or conduct their own businesses. Additionally, consolidation in our supply chain due to mergers and acquisitions may reduce the number of suppliers or change our relationships with them. The performance and financial condition of a supplier may cause us to alter our business terms or to cease doing business with a particular supplier, or change our sourcing practices generally, which could in turn adversely affect our own business and financial condition. Failure to effectively manage our manufacturing and our relationships with our suppliers could have a material adverse effect on our business and results of operations.

A failure to perform or unexpected downtime experienced by our sole source contract manufacturer for certain semiconductor test systems could adversely impact our operations.

We depend upon Jabil Manufacturing Co. (“Jabil”) to manufacture most of our semiconductor test systems from its facility located in Malaysia. In the event that Jabil is unable to meet Cohu’s current delivery schedule for semiconductor test systems, or if Jabil experienced unexpected downtime, we may not be able to sell, or have significant delays, in fulfilling our customer orders. If we experienced significant delays or disruptions with Jabil, it would take us significant time to ramp up a new manufacturer for our semiconductor test products, either in-house or with another contract manufacturer. There can be no assurance that alternative capacity could be obtained on favorable terms, if at all.

Failure of critical suppliers to deliver sufficient quantities of parts in a timely and cost-effective manner could adversely impact our operations.

We use numerous vendors to supply parts, components and subassemblies for the manufacture of our products. It is not always possible to maintain multiple qualified suppliers for all of our parts, components and subassemblies. As a result, many key parts may be available only from a single supplier (“sole source”) or a limited number of suppliers. In addition, suppliers may significantly raise prices or cease manufacturing certain components (with or without advance notice to us) that are difficult to replace without significant reengineering of our products. On occasion, we have experienced problems in obtaining adequate and reliable quantities of various parts and components from certain key or sole source suppliers. For example, at the beginning of 2022, we experienced supply constraints and delays in accessing certain specialty semiconductors necessary for the production of test instruments for our semiconductor ATE products, and these supply constraints adversely impacted our overall gross margin in 2022. Although the supply constraints have subsided entering 2023, they may reoccur at any time due to factors beyond our control. More broadly, our results of operations may be materially and adversely impacted if we do not receive sufficient parts to meet our requirements in a timely and cost-effective manner.

Ongoing inflationary pressures on costs, including those for raw and packaging materials, components and subassemblies, labor and distribution costs, along with rising interest rates, increase the threat of recession and may impact our financial condition or results of operations.

As a global manufacturer, we rely on raw materials, packaging materials, direct labor, energy, a large network of suppliers, distribution resources and transportation providers. In 2022, these costs, including those for transportation and other inputs necessary for the production and distribution of our products, increased. The COVID-19 pandemic caused significant increases in freight and shipping costs, and global inflationary pressures have pushed those costs even higher. In addition, we continue to see price increases and shortages on certain specialty semiconductors necessary for the production of test instruments for our semiconductor ATE products, and these events have adversely impacted our gross margins on such products. Further, we also continue to incur higher employee wage costs and generally higher costs for outside services. These events are driven by factors beyond our control, and although we are unable to predict the longer-term impacts, we expect these cost pressures to continue in 2023.

Our efforts to offset these cost pressures, such as through product price increases, or attempting to reduce operating costs elsewhere, may not be successful. Higher product prices may result in reductions in sales volume as customers may be less willing to pay a price differential for our products and may purchase lower-priced competitive offerings or may delay some purchases altogether. To the extent that this may result in decreases in sales volume, our financial condition or operating results may be adversely affected. Further, an extended period of higher prices may lead to continued regulatory efforts to tame price inflation, resulting in an increased risk of recession.

Our financial condition or operating results may also be affected by increasing interest rates, which the Federal Reserve raised multiple times in 2022, with expectations for additional increases in 2023. The raising of interest rates intended to cool down price inflation may also contribute to the risk of recession, which may result in customer projections of slowed growth and an overall impact on customer’s and Cohu’s corporate earnings. We saw slowing customer demand in 2022 and that trend has continued into 2023. Cohu is incurring increased interest expenses on our remaining indebtedness. In addition, our indebtedness may make us more vulnerable to changes in general economic conditions, with future inflationary pressures and efforts to reign in such an impact coupled with continued interest rate increases, thereby making it more costly for us to satisfy our obligations.

The semiconductor industry we serve is seasonal, volatile and unpredictable, and increased cyclicality could have an adverse impact on our sales and gross margin.

Visibility into our markets is limited. The semiconductor equipment business is highly dependent on the overall strength of the semiconductor industry. Historically, the semiconductor industry has been seasonal with recurring periods of oversupply and excess capacity, which often have had a significant effect on the semiconductor industry’s demand for capital equipment, including equipment of the type we manufacture and market. We anticipate that the markets for newer generations of semiconductors and semiconductor equipment will also be subject to similar cycles and severe downturns. Any significant reductions in capital equipment investment by semiconductor integrated device manufacturers and test subcontractors will materially and adversely affect our business, financial position, including the level of product sales and overall gross margin, and results of operations. In addition, the seasonal, volatile and unpredictable nature of semiconductor equipment demand has in the past and may in the future expose us to significant excess and obsolete and lower of cost or net realizable value inventory write-offs and reserve requirements. In 2022, 2021 and 2020, we recorded pre-tax inventory-related charges of approximately $7.2 million, $7.1 million, and $6.0 million, respectively, primarily as a result of changes in customer forecasts. We saw weakness in market conditions in 2019, followed by COVID-19 driven uncertainties in 2020, then a significant market recovery beginning in third quarter 2020. After record sales in 2021, demand weakened in 2022. Abrupt, unexpected and severe demand changes have occurred in the past and are expected to reoccur in the future within our industry. Since the onset of the COVID-19 pandemic, in particular, we have seen demand fluctuations in our test handler group (“THG”) and semiconductor test group (“STG”) businesses. Our recent sales have become more weighted toward THG and less toward STG products, which have had a material negative impact on our gross margins. The company took action to reduce expenses and improve overall operational efficiency, and such actions largely offset the mix-related gross margin impacts. Given the nature of our industry, we generally cannot accurately predict mix swings from quarter-to-quarter and such changes may have sudden adverse impacts on our gross margin.

The semiconductor equipment industry is intensely competitive.

The industries we serve are intensely competitive, and we face substantial competition from numerous companies throughout the world. The test handler industry, while relatively small in terms of worldwide market size compared to other segments of the semiconductor equipment industry, has several participants resulting in intense competitive pricing pressures. Future competition may include companies that do not currently supply test handlers. In addition, there are emerging companies that provide or may provide innovative technology incorporated in products that may compete successfully against our products. We expect our competitors to continue to improve the design and performance of their current products and introduce new products with improved performance capabilities. Our failure to introduce new products in a timely manner, the introduction by our competitors of products with perceived or actual advantages, or disputes over rights to use certain intellectual property or technology could result in a loss of our competitive position and reduced sales of, or margins on our existing products. Intense competition has adversely impacted our product average selling prices and gross margins on certain products. If we are unable to price our existing products competitively and successfully introduce new competitively priced products, then we expect that these competitive conditions would negatively impact our gross margin and operating results in the foreseeable future.

We have increased investments in our test contactor business and targeted significant growth opportunities. However, the test contactor market is fragmented, with many entrenched regional players, and subject to intense price competition and high localized customer support requirements. We believe that customer support and responsiveness and an ability to consistently meet tight deadlines is critical to our success. If we are unable to continue to reduce the cost of our test contactor products, while also meeting customer support requirements and deadlines, then we expect that these competitive conditions would negatively impact our test contactor operating results and impede us from achieving our test contactor sales goals.

With respect to Cohu’s automated test equipment (“ATE”) business, our ability to increase ATE sales depends, in part, on our ability to win new customers. Semiconductor and electronics manufacturers typically select a particular vendor’s product for testing new generations of a device and make substantial investments to develop related test program applications and interfaces. Once a manufacturer has selected an ATE vendor for a new generation of a device, that manufacturer is more likely to purchase systems from that vendor for that generation of the device, and, possibly, subsequent generations of that device as well. Cohu has a niche position and relatively low share in the ATE market, which is primarily driven by two larger companies with significantly more resources to invest into the ATE market. Therefore, the opportunities to obtain orders from new customers or existing customers may be limited, which may impair our ability to grow our ATE revenue. We also believe that our niche position results in greater sales cyclicality versus larger more diversified ATE vendors and Cohu experienced such adverse cyclicality in 2022. These factors may materially and adversely affect our current and future target markets and our ability to compete successfully in those markets.

Semiconductor equipment is subject to rapid technological change, product introductions and transitions which may result in inventory write-offs, and our new product development involves numerous risks and uncertainties.

Semiconductor equipment and processes are subject to rapid technological change. We believe that our future success will depend in part on our ability to enhance existing products and develop new products with improved performance capabilities. We expect to continue to invest heavily in research and development and must manage product transitions successfully, as introductions of new products, including the products obtained in our acquisitions, may adversely impact sales and/or margins of existing products. In addition, the introduction of new products by us or by our competitors, the concentration of our revenues in a limited number of large customers, the migration to new semiconductor testing methodologies and the custom nature of our inventory parts increases the risk that our established products and related inventory may become obsolete, resulting in significant excess and obsolete inventory exposure. This exposure resulted in charges to operations during each of the years in the three-year period ended December 31, 2022. Future inventory write-offs and increased inventory reserve requirements could have a material adverse impact on our results of operations and financial condition.

The design, development, commercial introduction and manufacture of new semiconductor equipment is an inherently complex process that involves a number of risks and uncertainties. These risks include potential problems in meeting customer acceptance and performance requirements, integration of the equipment with other suppliers’ equipment and the customers’ manufacturing processes, transitioning from product development to volume manufacturing and the ability of the equipment to satisfy the semiconductor industry’s constantly evolving needs and achieve commercial acceptance at prices that produce satisfactory profit margins. The design and development of new semiconductor equipment is heavily influenced by changes in integrated circuit assembly, test and final manufacturing processes and integrated circuit package design changes. We believe that the rate of change in such processes and integrated circuit packages is accelerating. As a result of these changes and other factors, assessing the market potential and commercial viability of test handling, ATE, MEMS, system-level and burn-in test equipment and test contactors is extremely difficult and subject to a great deal of risk. In addition, not all integrated circuit manufacturers employ the same manufacturing processes. Differences in such processes make it difficult to design standard test products that can achieve broad market acceptance. As a result, we might not accurately assess the semiconductor industry’s future equipment requirements and fail to design and develop products that meet such requirements and achieve market acceptance. Failure to accurately assess customer requirements and market trends for new semiconductor test products may have a material adverse impact on our operations, financial condition and results of operations.

The transition from product development to the manufacture of new semiconductor equipment is a difficult process and delays in product introductions and problems in manufacturing such equipment are common. We have in the past and may in the future, experience difficulties in manufacturing and volume production of our new equipment. In addition, as is common with semiconductor equipment, after sale support and warranty costs have typically been significantly higher with new products than with our established products. Future technologies, processes and product developments may render our current or future product offerings obsolete and we might not be able to develop, introduce and successfully manufacture new products or make enhancements to our existing products in a timely manner to satisfy customer requirements or achieve market acceptance. Furthermore, we might not realize acceptable profit margins on such products.

The seasonal nature of the semiconductor equipment industry places enormous demands on our employees, operations and infrastructure.

The semiconductor equipment industry is characterized by dramatic and sometimes rapid changes in demand for its products. These are generally dictated by introduction of new consumer products, launch of new model vehicles, implementation of new communications infrastructure, or in response to an increase in industrial equipment and machinery that utilizes semiconductors. A number of other factors including changes in integrated circuit design and packaging may affect demand for our products. Sudden changes in demand for semiconductor equipment commonly occur, and have a significant impact on our operations, and such changes in demand (up or down) are difficult to predict and proactively plan for. We have in the past and may in the future experience difficulties, particularly in manufacturing, and with training and recruiting large numbers of additions to our workforce. The volatility in headcount and business levels, combined with the seasonal nature of the semiconductor industry, may require that we invest substantial amounts in new operational and financial systems, procedures and controls. We may not be able to timely or successfully adjust our systems, facilities and production capacity to meet our customers’ changing requirements. Any inability to meet such requirements will have an adverse impact on our business, financial position and results of operations. Sudden demand changes in business conditions, positive or negative, are common in our industry but the timing of such changes is very difficult to predict.

A limited number of customers account for a substantial percentage of our net sales.

A small number of customers have been responsible for a significant portion of our net sales. For fiscal year 2022, net revenue from our ten largest customers represented 56% of our total net revenue. During the past five years, the percentage of our sales derived from these significant customers has varied greatly. Such variations are due to changes in the customers’ business, consolidation within the semiconductor industry and their purchase of products from our competitors. It is common in the semiconductor equipment industry for customers to purchase products from more than one equipment supplier, increasing the risk that our competitive position with a specific customer may deteriorate. No assurance can be given that we will continue to maintain our competitive position with these or other significant customers. Also, consolidation in the semiconductor industry may reduce our customer base and could adversely affect the market for our products, which could cause a decline in our revenues. With consolidation, the number of actual and potential customers for our products has decreased in recent years. Consolidation may lead to relatively fewer opportunities to sell our products if we are not chosen as a supplier by any given prospective customer, and may lead to increased pricing pressures from customers that have greater volume purchasing power.

We expect the percentage of our revenues derived from significant customers will vary greatly in future periods. The loss of, or a significant reduction in, orders by these or other significant customers as a result of competitive products, market conditions including end market demand for our customers’ products, outsourcing final semiconductor test to test subcontractors that are not our customers or other factors, would have a material adverse impact on our business, financial condition and results of operations. Furthermore, the concentration of our revenues in a limited number of large customers is likely to cause significant fluctuations in our future annual and quarterly operating results.

A majority of our revenues are generated from exports to foreign countries, primarily in Asia, that are subject to economic and political instability and we compete against a number of Asia-based test contactor, test handler and automated test equipment suppliers.

The majority of our export sales are made to destinations in Asia. Political or economic instability, particularly in Asia, may adversely impact the demand for capital equipment, including equipment of the type we manufacture and market (see risk factor “Global economic and political conditions, including trade tariffs and export restrictions, have impacted our business and may continue to have an impact on our business and financial condition”). In addition, we face intense competition from a number of Asian suppliers that have certain advantages over United States (U.S.) suppliers, including us. These advantages include, among other things, proximity to customers, lower cost structures, a willingness to compete solely on price, favorable tariffs and other government preferences, and affiliation with significantly larger organizations. In addition, changes in the amount or price of semiconductors produced in Asia could impact the profitability or capital equipment spending programs of our foreign and domestic customers.

If we cannot continue to develop, manufacture, market and support products and services that meet customer requirements for innovation and quality, our revenue and gross margin may suffer.

The process of developing new high technology products and services and enhancing existing products and services is complex, costly and uncertain, and any failure by us to anticipate customers’ changing needs and emerging technological trends accurately could significantly harm our sales and results of operations. Our customers’ selection processes typically are lengthy and can require us to incur significant sales, service and engineering expenses, and to provide the customer evaluation systems for several months at no charge, in pursuit of a single customer opportunity. We may not win the competitive selection process and may never generate any revenue despite incurring such expenditures. The delays inherent in these lengthy sales cycles increase the risk that a customer will decide to cancel, curtail, reduce or delay its product plans, causing us to lose anticipated sales.

In addition, in the course of conducting our business, we must adequately address quality issues associated with our products and services, including defects in our engineering, design and manufacturing processes, as well as defects in third-party components included in our products. To address quality issues, we work extensively with our customers and suppliers and engage in product testing to determine the cause of quality problems and appropriate solutions. Finding solutions to quality issues can be expensive and may result in additional warranty, replacement and other costs. In addition, if any of our products contain defects or have reliability, quality or safety issues, we may need to conduct a product recall which could result in significant repair or replacement costs and substantial delays in product shipments and may damage our reputation, which could make it more difficult to sell our products. Any of these occurrences could have a material adverse effect on our business, results of operations or financial condition. In addition, quality issues can impair our relationships with new or existing customers and adversely affect our reputation, which could lead to a material adverse effect on our operating results.

The loss of key personnel could adversely impact our business.

Certain key personnel are critical to our business. Our future operating results depend substantially upon the continued service of our key personnel, many of whom are not bound by employment or non-competition agreements. Our future operating results also depend in significant part upon our ability to attract and retain qualified management, manufacturing, technical, engineering, marketing, sales and support personnel. Competition for qualified personnel, particularly those with technical skills, is intense, and we cannot ensure success in attracting or retaining qualified personnel. In addition, the cost of living in the San Diego and Bay Area, California; Boston, Massachusetts; St. Paul, Minnesota; Lincoln, Rhode Island; Kolbermoor, Germany; La Chaux-de-Fonds, Switzerland and Osaka, Japan areas, where the majority of our engineering personnel are located, is high, and increasing further due to inflationary effects, and we have had difficulty in recruiting prospective employees from other locations. There may be only a limited number of persons with the requisite skills and relevant industry experience to serve in these positions and it may become increasingly difficult for us to hire personnel over time. More recently, the COVID-19 pandemic has increased the risks that our executives and other key employees may be suddenly unable to perform their duties due to health or other personal responsibilities. Our business, financial condition and results of operations could be materially adversely affected by the loss of any of our key employees, by the failure of any key employee to perform in his or her current position, or by our inability to attract and retain skilled employees.

Risks Associated with Operating a Global Business

We are exposed to the risks of operating in certain foreign locations where Cohu manufactures certain products and supports our sales and services to the global semiconductor industry.

We are a global corporation with offices and subsidiaries in certain foreign locations to manufacture our products and support our sales and services to the global semiconductor industry. As such, we face risks in doing business globally. For example, while our corporate headquarters are located in California, additional key engineering, sales, and administrative personnel are located in China, Germany, Japan, Malaysia, Philippines, Singapore, Switzerland, Taiwan and elsewhere in the U.S., and our manufacturing operations are primarily located in Germany, Japan, Malaysia, Philippines and the U.S. Certain aspects inherent in transacting business internationally could negatively impact our operating results, including:

Additionally, managing geographically dispersed operations presents difficult challenges associated with organizational alignment and infrastructure, communications and information technology, inventory control, customer relationship management, terrorist threats and related security matters and cultural diversities. If we are unsuccessful in managing such operations effectively, our business and results of operations will be adversely affected.

We continue to monitor global privacy laws and legislation to determine its impact on our business. We do not sell to consumers nor process individual credit card information, but do maintain certain personally identifiable information on our employees. Such employee information may be subject to the EU General Data Protection Regulation and the recently effective California Consumer Protection Act. We believe that we have implemented reasonable procedures and internal controls in compliance with these laws, but should such actions be insufficient, we may be subject to regulatory investigations, fines and legal costs. If one or more of these risks occurs, it could require us to dedicate significant resources to remedy, and if we are unsuccessful in finding a solution, our financial results will suffer.

Geopolitical instability in locations critical to Cohu and its customers’ business, manufacturing, and engineering operations may adversely impact our operations and sales.

An increase in geopolitical tensions in Asia, particularly in the Taiwan Strait, could disrupt existing semiconductor chip manufacturing and increase the prospect of an interruption to the semiconductor chip supply across the world. A setback to the current state of relative peace and stability in the region could compromise existing semiconductor chip production and have downstream implications for our company. The world’s largest semiconductor chip manufacturer is located in Taiwan and is a top supplier for many U.S. companies, many of which are part of the company’s customer base. Further, recent geopolitical tensions between Ukraine and Russia could adversely impact the supply chain in this region, particularly with respect to critical materials and metals, such as palladium which is used in our interface products as well as in semiconductors. Any interruption to semiconductor chip supply and its related impact to the company’s customers, or any disruption in our supply chain, could result in an adverse impact to our financial results.

Global economic and political conditions, including trade tariffs and exchange rates, have impacted our business and may continue to have an impact on our business and financial conditions that we currently cannot predict.

In fiscal year 2022, 90% of our revenue was from products shipped to customer locations outside the United States. We also purchase a significant portion of components and subassemblies from suppliers outside the United States. Additionally, a significant portion of our facilities are located outside the United States, including Germany, Japan, Malaysia, Philippines, Singapore, South Korea, Switzerland and Taiwan. Given our extensive global operations, we are subject to immediate impacts from any changing tariff or export regulations (see risk factor entitled “Increasingly restrictive trade and export regulations may materially harm Cohu’s business and ability to sell its products without limitations”).

It remains our plan to continue our international growth. We have business operations within the jurisdictions listed above, and while we report our financial results in U.S. dollars, we incur certain costs in other currencies. As a result, the company holds exposure to fluctuations in currency exchange rates, and significant fluctuations in exchange rates between the U.S. dollar and foreign currencies may adversely affect our revenues and earnings, despite actions we take to minimize those currency exposures. Additionally, engaging in foreign currency contracts to minimize such currency exposure could result in additional costs and risks that could adversely affect our financial condition and results of operations.

The occurrence of natural disasters, health epidemics, and geopolitical instability caused by terrorist attacks and other threats may adversely impact our operations and sales.

Our corporate headquarters is located in San Diego, California, our Asian sales and service headquarters are located in Singapore and Taiwan, and the majority of our sales are made to destinations in Asia. In addition, we have Asia-based manufacturing plants in Malaysia, Philippines and Japan. These regions are known for being vulnerable to natural disasters and other risks, such as earthquakes, tsunamis, fires and floods, volcanic eruptions, and geopolitical risks, which at times have disrupted the local economies. For example, a significant earthquake or tsunami could materially affect operating results. Although we believe that we carry reasonable and appropriate business insurance, we may not be insured for certain losses and business interruptions of this kind, or for geopolitical or terrorism impacts, and presently have very limited redundant, multiple site capacity in the event of a disaster. In the event of such disaster, our business would materially suffer.

Our business could also be adversely affected by the effects of a widespread outbreak of contagious diseases, and has been adversely affected by the COVID-19 global pandemic (see risk factor entitled “While the ongoing global COVID-19 pandemic has stabilized within many global regions, it may cyclically continue to adversely affect, our business, financial condition and results of operations”).

Our business could be materially and adversely affected by climate change and related matters.

We analyze climate change risks in two separate categories: transition risks and physical risks. Transition risks are those risks relating to the transition of the global economy to a focus on more climate-friendly technologies. This transition could have adverse financial impacts on us in several ways. For instance, more stringent environmental policies or regulations could lead to increased expenses relating to green-house gas emissions or other emissions that could increase our operating costs. Enhanced emissions-reporting or shifting technology could require us to write off or impair assets or retire existing assets early. Increased environmental mandates could also increase our exposure to litigation. We could be required to incur increased costs and significant capital investment to transition to lower emissions technologies. In addition, overall market shifts could increase costs of our raw materials and cause unexpected shifts in energy costs. Focus on sustainability has increased, and the company or its industry could be stigmatized as not friendly to the environment, which could adversely affect our reputation and our business, including due to difficulties in employee hiring and retention and our ability to access capital. Any of these matters could materially and adversely affect our business, financial condition or results of operations.

Physical risks from climate change that could affect our business include acute weather events such as floods, tornadoes or other severe weather and ongoing changes such as rising temperatures or extreme variability in weather patterns. These events could lead to increased capital costs from damage to our facilities, increased insurance premiums or reduced revenue from decreased production capacity based on supply chain interruptions. Any of these events could have a material adverse effect on our business, financial condition or results of operations (see risk factor entitled “The occurrence of natural disasters, health epidemics, and geopolitical instability caused by terrorist attacks and other threats may adversely impact our operations and sales”).

Increasingly restrictive trade and export regulations may materially harm and limit Cohu’s business and restrict our ability to sell products, specifically within China.

There have been significant changes in U.S. export regulations relating to China since 2019. Such changes initially included restrictions on exports to certain China-domiciled entities including Huawei and broader definitions and restrictions on “military end users” and “uses.” In 2022, export controls were issued relating to the Chinese semiconductor manufacturing, advanced computing, and supercomputer industries, where these additional controls may impact our ability, and/or that of our customers, to sell and ship products to semiconductor fabrication facilities located in China. These export controls include restrictions on certain semiconductor integrated circuits, commodities containing such integrated circuits, and semiconductor manufacturing equipment. Furthermore, the export controls restrict the ability of U.S. persons to support the development or production of integrated circuits at certain semiconductor fabrication facilities in China.

These collective export restrictions and the ongoing unpredictability of U.S.-China trade relations have encouraged China-based companies to actively seek to obtain a greater supply of similar or substitute products from our foreign competitors that are not subject to these restrictions, thereby decreasing our long-term competitiveness as a supplier to China-based companies. These ongoing actions indicate that the U.S. government may impose other new export restrictions. If implemented with no prior notice, even controls that ultimately have minimal long-term impact to Cohu, may create short-term limitations on Cohu’s business as it evaluates the full impact of such new and any subsequent controls. The prospect of future export controls that are implemented in a similar manner may continue to have an ongoing impact on Cohu’s business, results of operations, or financial conditions.

Political instability resulting from the military incursion into Ukraine by Russia continues to cause significant disruption to foreign and domestic economies, leading to broad and significant economic sanctions against Russia with an ongoing impact to material and commodity prices while raising sustained global uncertainty.

The tensions related to Russia’s actions have resulted in the United States and many European countries imposing significant economic sanctions on Russia and specific individuals targeted as having connections to the Russian government. The totality of these actions has continued to impact international trade relationships, and resulted in sustained increases in the cost of materials, where higher oil and other commodity prices have resulted in further increased shipping and transportation costs. Furthermore, energy shortages, particularly with respect to natural gas, should they occur in Europe, would disrupt our test handler operations and research and development activities at our Kolbermoor, Germany and La Chaux-de-Fonds facilities. Any increases in the cost, or shortages, of materials or energy may continue to create supply issues for critical materials that could constrain manufacturing levels for Cohu’s customers, leading to a decrease in demand for Cohu’s products.

The global impact of the military action and subsequent imposing of sanctions continues to evolve and cannot be sufficiently measured or predicted with certainty. The inherent uncertainty surrounding this war may negatively impact the share prices of publicly traded companies. Government entities and both public and private companies within the United States may be exposed to attempted or actual cybersecurity attacks launched in retaliation, resulting in disruptions to domestic markets and a prolonged state of global market volatility. Furthermore, there remains ongoing uncertainty with respect to China’s willingness to support ongoing or expanded sanctions, which could distance China from its existing trade partners, potentially creating a significant impact to the semiconductor chip and equipment industries that conduct operations within China, Taiwan and the region. There is a likelihood that these sanctions, and related geopolitical tensions, will not be resolved in the short-term but will have a lengthy disruption to all global companies.

Risks Relating to our Indebtedness, Financing and Future Access to Capital

Our Credit Agreement contains various representations and negative covenants that limit, subject to certain exceptions and baskets, our ability and/or our subsidiaries’ ability to, take certain actions.

Cohu’s existing indebtedness of approximately $79 million, primarily the result of Cohu previously entering into a term loan facility (the “Credit Agreement”), limits our ability to:

The restrictions contained in our Credit Agreement could adversely affect our ability to:

A breach of any of these negative covenants could result in a default under the Credit Agreement. Further, additional indebtedness that we incur in the future may subject us to further covenants. Our failure to comply with these covenants could result in a default under the agreements governing the relevant indebtedness. The lender may accelerate the payment terms of the Credit Agreement upon the occurrence of certain events of default set forth therein, which include: the failure of Cohu to make timely payments of amounts due under the Credit Agreement, the failure of Cohu to adhere to the representations and covenants set forth in the Credit Agreement, the failure to provide notice of any event that causes a material adverse effect or to provide other required notices, upon the event that related collateral agreements become ineffective, upon the event that certain legal judgments are entered against Cohu, the insolvency of Cohu, or upon the change of control of Cohu. Any event that could require us to repay debt prior to its due date could have a material adverse impact on our financial condition and results of operations.

Our ability to comply with covenants contained in such debt agreements may be affected by events beyond our control, including prevailing economic, financial and industry conditions. Even if we are able to comply with all of the applicable covenants, the restrictions on our ability to manage our business in our sole discretion could adversely affect our business by, among other things, limiting our ability to take advantage of financings, mergers, acquisitions and other corporate opportunities that we believe would be beneficial to us. In addition, our obligations under the Credit Agreement are secured, on a first-priority basis, and such security interests could be enforced in the event of default by the collateral agent for the Credit Agreement.

Due to the nature of our business, we need continued access to capital, which if not available to us or if not available on favorable terms, could harm our ability to operate or expand our business.

Our business requires capital to finance accounts receivable and product inventory that is not financed by trade creditors when our business is expanding. If cash from available sources is insufficient or cash is used for unanticipated needs, we may require additional capital sooner than anticipated.

We believe that our existing sources of liquidity, including cash resources and cash provided by operating activities will provide sufficient resources to meet our working capital and cash requirements for at least the next twelve months; however, a material adverse impact on our business from unforeseen events or a desire to reduce our outstanding indebtedness could result in a need to raise additional capital. Alternatively, we could decide to raise capital or incur additional indebtedness to fund strategic initiatives or operating activities, particularly if we pursue additional acquisitions. In the event we are required, or elect, to raise additional funds, we may be unable to do so on favorable terms, or at all, and may incur expenses in raising the additional funds and increase our interest rate exposure, and any future indebtedness could adversely affect our operating results and severely limit our ability to plan for, or react to, changes in our business or industry. Further, under our Credit Agreement, we are limited by financial and other negative covenants in our credit arrangements, including limitations on our borrowing of additional funds and issuing dividends. If we cannot raise funds on acceptable terms, we may not be able to take advantage of future opportunities or respond to competitive pressures or unanticipated requirements. Any inability to raise additional capital when required could have an adverse effect on our business and operating results.

Risks Relating to Acquisitions and Other Strategic Transactions

Because a significant portion of Cohu’s total assets are represented by goodwill, which is subject to mandatory impairment evaluation, and other intangibles, Cohu could be required to write off some or all of this goodwill and other intangibles, which may adversely affect the combined company’s financial condition and results of operations.

Goodwill and other intangibles comprise 29% of Cohu’s total assets, of which approximately $213.5 million of our total assets are allocated to goodwill. In accordance with Accounting Standards Codification (“ASC”) Topic 350, Intangibles - Goodwill and Other, goodwill and certain other intangible assets with indefinite useful lives are not amortized but are reviewed at least annually for impairment, or more frequently if there are indications of impairment. Significant declines in the price of Cohu’s common stock could increase the risk of an impairment. All other intangible assets are subject to periodic amortization. Cohu evaluates the remaining useful lives of other intangible assets each quarter to determine whether events and circumstances warrant a revision to the remaining period of amortization. When Cohu performs future impairment tests, it is possible that the carrying value of goodwill or other intangible assets could exceed their implied fair value and therefore would require adjustment. Such adjustment would result in a charge to operating income in that period. There can be no assurance that there will not be further adjustments for impairment in future periods.

We are exposed to other risks associated with additional potential acquisitions, investments and divestitures such as integration difficulties, disruption to our core business, dilution of stockholder value, and diversion of management attention.

As part of our business strategy, we will continue to regularly evaluate investments in, or acquisitions of, complementary businesses, joint ventures, services and technologies, and we expect that periodically we will continue to make such investments and acquisitions in the future. Acquisitions and investments involve numerous risks, including, but not limited to:

We may decide to finance future acquisitions and investments through a combination of borrowings, proceeds from equity or debt offerings and the use of cash, cash equivalents and short-term investments. If we finance acquisitions or investments by issuing equity-linked (such as convertible debt) or equity securities, our existing stockholders may be diluted which would likely affect the market price of our stock. Mergers, acquisitions and investments are inherently risky and the inability to effectively manage these risks could materially and adversely affect our business, financial condition and results of operations.

Risks Relating to Owning Our Stock

Our financial and operating results may vary and fall below analysts’ estimates, or credit rating agencies may change their ratings on Cohu, any of which may cause the price of our common stock to decline or make it difficult to obtain other financing.

Our operating results may fluctuate from quarter to quarter due to a variety of factors including, but not limited to:

●    seasonal, volatile and unpredictable nature of the semiconductor equipment industry;

●    timing and amount of orders from customers and shipments to customers;

●    customer decisions to cancel orders or push out deliveries;

●    inability to recognize revenue due to accounting requirements;

●    inventory write-downs;

●    unexpected expenses or cost overruns in the introduction and support of products;

●    inability to deliver solutions as expected by our customers;

●    geopolitical changes impacting our business, including with respect to China and Taiwan;

●    intangible and deferred tax asset write-downs; and

●    general economic and market conditions, including impacts from sanctions against Russia and the military conflict in Ukraine, increased inflationary pressures, interest rate changes, and any resurgence of the COVID-19 pandemic.

Due to these factors or other unanticipated events, quarter-to-quarter comparisons of our operating results may not be reliable indicators of our future performance. In addition, from time-to-time our quarterly financial results may fall below the expectations of the securities and industry analysts who publish reports on our company or of investors in general. This could cause the market price of our stock to decline, perhaps significantly.

In addition, as a result of the Term Loan Credit Facility, we maintain credit ratings with Moody’s Investors Service, Inc. (“Moody’s”) and S&P Global Ratings (“S&P”). Any downgrades of Cohu’s credit ratings or rating outlooks, if and when they were to occur, may materially and adversely affect the market price of our equity and the availability, cost or interest rate of other credit or financing. Cohu’s current credit ratings are considered non-investment grade and make it more costly (as compared to investment grade borrowers) for Cohu or its subsidiaries to borrow money or enter into new credit facilities and to raise certain other types of capital and/or complete additional financings.

If we fail to maintain an effective system of internal control over financial reporting, we may not be able to accurately report our financial results, and current and potential stockholders may lose confidence in our financial reporting.

We are required by the Securities and Exchange Commission to establish and maintain adequate internal control over financial reporting that provides reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements in accordance with generally accepted accounting principles. We are likewise required, on a quarterly basis, to evaluate the effectiveness of our internal controls and to disclose any changes and material weaknesses in those internal controls. Although we believe that we have adequate internal controls in place at this time, we cannot be certain that, with significantly greater global complexity, we will be able to maintain adequate internal control over our financial reporting in future periods. Any failure to maintain such internal controls could adversely impact our ability to report our financial results on a timely and accurate basis. If our financial statements are not accurate, investors may not have a complete understanding of our operations. Likewise, if our financial statements are not filed on a timely basis as required by the Securities and Exchange Commission and Nasdaq Global Select Market, we could face severe consequences from those authorities. In either case, there could result a material adverse effect on our business. Inferior internal controls could also cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our stock.

We have experienced significant volatility in our stock price.

A variety of factors may cause the price of our stock to be volatile. The stock market in general, and the market for shares of high-technology companies in particular, including ours, have experienced extreme price fluctuations, which have often been unrelated to the operating performance of affected companies. During the three-year period ended December 31, 2022, the price of our common stock has ranged from $51.86 to $8.89. The price of our stock may be more volatile than the stock of other companies due to, among other factors, the unpredictable, volatile and seasonal nature of the semiconductor industry, our significant customer concentration, intense competition in the test contactor, test handler, automated test equipment industry, our limited backlog, our debt levels, and our relatively low daily stock trading volume. The market price of our common stock is likely to continue to fluctuate significantly in the future, including fluctuations related and unrelated to our performance.

We may underperform relative to our expectations.

Our business and financial performance are subject to certain risks and uncertainties, as described in these risk factors. We may not achieve our forecasted growth rates, levels of revenue, earnings, or operating efficiency that we expect and may incur losses in the business at any time. Any underperformance from our expectations or forecasts could have a material adverse effect on our financial condition, results of operations, and cause abrupt, significant stock price declines. Also, perceived company underperformance could attract shareholder activism and such activities could interfere with our ability to execute our business plans, be costly and time-consuming, disrupt our operations, divert the attention of management or result in other short-term focused corporate actions, any of which could have an adverse effect on our business or stock price.

The issuance of shares of our common stock in connection with any future offerings of securities by us, will dilute our shareholders’ ownership interest in the company.

We may seek additional financing in the future to meet our capital needs, to repay outstanding indebtedness under our existing Credit Agreement or to meet our strategic initiatives or operating activities. We have in the past issued common stock as acquisition consideration and for general corporate purposes. For example, in March 2021, we issued 5,692,500 additional shares of our common stock in an underwritten follow-on public offering, an increase of 13.4% of outstanding shares of common stock. We may determine to utilize common stock as acquisition consideration, issue convertible debt, or pursue another follow-on equity offering to raise capital for debt reduction or for other general corporate purposes, at any time in the future. Any issuances of additional shares of our common stock would dilute shareholders’ ownership interest in our company, and shareholders would have a proportionately reduced ownership and voting interest in our company as a result of equity issuance. If we raise additional funds by issuing debt, we may be subject to limitations on our operations due to restrictive covenants. Additionally, our ability to make scheduled payments or refinance our obligations will depend on our operating and financial performance, which in turn is subject to prevailing economic conditions and financial, business and other factors beyond our control.

Provisions of our certificate of incorporation and bylaws and Delaware law may make a takeover of Cohu more difficult.

There are provisions in our basic corporate documents and under Delaware law that could discourage, delay or prevent a change in control, even if a change in control may be regarded as beneficial to some or all of our stockholders.

Cohu’s stock repurchase program may not have an impact that is fully reflected in the current stock valuation.

Effective November 2, 2021, a $70 million share repurchase program was authorized by our Board of Directors. On October 25, 2022, our Board of Directors authorized an additional $70 million under the share repurchase program. The stock repurchase program was authorized to potentially offset dilution from equity issuances under Cohu’s equity incentive plans and because the Board believes that, for reasons unrelated to the company’s performance, the trading price of Cohu’s common stock from time to time may not be reflective of the true value of the company. Any repurchases have been and may be made in the future using our existing cash resources. The company gives no assurances as to when, how much and for what duration stock repurchases may be made. However, stock repurchases may adversely affect the company if the economy turns downward, as it could leave the company limited in its ability to obtain cash necessary for ongoing operations or potential acquisition targets. In addition, any repurchase of stock may have no positive impact on our stock price. Further, as stock may be repurchased, given the volatility of our stock price, we may repurchase stock at prices which, in hindsight, are materially higher than the subsequent price of our stock.

Risks Relating to Regulatory Matters

There may be changes in, and uncertainty with respect to, legislation, regulation and governmental policy in the United States.

Specific legislative and regulatory proposals that could have a material impact on us include, but are not limited to, infrastructure renewal programs, modifications to international trade policy, increased duties, tariffs or other export restrictions, public company reporting requirements, climate change and environmental regulation, corporate tax legislation, new employment and privacy laws, and antitrust enforcement.

Unanticipated changes in our tax provisions, enactment of new tax laws, or exposure to additional income tax liabilities could affect our profitability.

We are subject to income and other taxes in the U.S. and numerous foreign jurisdictions. Our tax liabilities are affected by, among other things, the amounts our affiliated entities charge each other for intercompany transactions. Our German, Singaporean, Philippines, and Malaysian subsidiaries have income tax returns currently under routine examination by tax authorities for different periods between 2015 and 2020. We may be subject to ongoing tax examinations in various jurisdictions. Tax authorities may disagree with our intercompany charges or other matters and assess additional taxes. While we regularly assess the likely outcomes of these examinations to determine the appropriateness of our tax provision, tax audits are inherently uncertain, and an unfavorable outcome could occur. An unanticipated, unfavorable outcome in any specific period could harm our operating results for that period or future periods. The financial cost and management attention and time devoted to defending income tax positions may divert resources from our business operations, which could harm our business and profitability. Tax examinations may also impact the timing and/or amount of our refund claims.

In addition, our effective tax rate in the future could be adversely affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of our deferred tax assets and liabilities, changes in tax laws and the discovery of new information during our tax return preparation process. In particular, the carrying value of our deferred tax assets and the utilization of our net operating loss and credit carryforwards are dependent on our ability to generate future taxable income in the U.S. and other countries. Furthermore, these carryforwards may be subject to annual limitations as a result of changes in Cohu’s ownership.

Beginning in 2022, the Tax Cuts and Jobs Act, or the Tax Act, eliminated the option to deduct research and development expenditures currently and requires taxpayers to capitalize and amortize them over five or fifteen years pursuant to Internal Revenue Code Section 174. This has increased our effective tax rate and our cash tax payable in 2022. If the requirement to capitalize Section 174 expenditures is not modified, it may also impact our effective tax rate and our cash tax liability in future years.

During December 2022, the Organization for Economic Cooperation and Development (“OECD”) announced that it has reached agreement among its 136-member countries that certain multinational enterprises will be subject to a global minimum tax rate of 15%, also known as Pillar Two. South Korea became the first country to enact such global minimum tax rules, which will be effective for fiscal years beginning on or after January 1, 2024. These specific actions did not impact our consolidated financial statements in 2022, however, many more countries are expected to issue laws and regulations to conform with this guidance soon. We will continue to monitor the pertinent law changes and regulations to determine the impact they would have on our operating and financial results.

Compliance with regulations may impact sales to foreign customers and impose costs.

Certain products and services that we offer require compliance with U.S. and other foreign country export and other regulations. Compliance with complex U.S. and other foreign country laws and regulations that apply to our international sales activities increases our cost of doing business in international jurisdictions and could expose us or our employees to fines and penalties. These laws and regulations include import and export requirements, the U.S. State Department International Traffic in Arms Regulations (“ITAR”) and U.S. and other foreign country laws such as the Foreign Corrupt Practices Act (“FCPA”), and local laws prohibiting corrupt payments to governmental officials. Violations of these laws and regulations could result in fines, criminal sanctions against us, our officers or our employees, prohibitions on the conduct of our business and damage to our reputation. Although we have implemented policies and procedures designed to ensure compliance with these laws, there can be no assurances that our employees, contractors or agents will not violate our policies, or that our policies will be effective in preventing all potential violations. Any such violations could include prohibitions on our ability to offer our products and services to one or more countries, and could also materially damage our reputation, our brand, our international expansion efforts, our ability to attract and retain employees, our business and our operating results. Further, defending against claims of violations of these laws and regulations, even if we are successful, could be time-consuming, result in costly litigation, divert management’s attention and resources and cause us to incur significant expenses.

In addition to government regulations regarding sale and export, we are subject to other regulations regarding our products. For example, the U.S. Securities and Exchange Commission has adopted disclosure rules for companies that use conflict minerals in their products, with substantial supply chain verification requirements if the materials come from, or could have come from, the Democratic Republic of the Congo or adjoining countries. These rules and verification requirements impose additional costs on us and on our suppliers and may limit the sources or increase the cost of materials used in our products. Further, if we are unable to certify that our products are conflict free, we may face challenges with our customers that could place us at a competitive disadvantage, and our reputation may be harmed.

Any failure to comply with environmental laws and regulations could subject us to significant fines and liabilities, and new laws and regulations (such as involving climate change) or changes in regulatory interpretation or enforcement could make compliance more difficult and costly.

We are subject to various U.S. federal, state and local, and foreign governmental laws and regulations relating to the protection of the environment, including those governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes, the cleanup of contaminated sites and the maintenance of a safe workplace. We could incur substantial costs, including cleanup costs, civil or criminal fines or sanctions and third-party claims for property damage or personal injury, as a result of violations of or liabilities under environmental laws and regulations or non-compliance with the environmental permits required at our facilities. In addition, new regulations or shareholder or other public expectations for reductions in greenhouse gas emissions could result in increased energy, transportation and raw material costs, and may require us to make additional investments in facilities and equipment. As a result, the effects of climate change could have a long-term adverse impact on our business and results of operations.

Risks Relating to Cybersecurity, Intellectual Property and Litigation

Our business and operations could suffer in the event of cybersecurity breaches within our operational systems or products.

Attempts by others to gain unauthorized access to information technology systems are becoming more sophisticated and are sometimes successful. These attempts, which might be related to industrial or other espionage, include covertly introducing malware to our computers and networks and impersonating authorized users, among others. We seek to detect and investigate all cybersecurity incidents and to prevent their recurrence, but in some cases, we might be unaware of an incident or its magnitude and effects. We have been impacted by immaterial “phishing” schemes and we are continuing our efforts to train employees on such risks but may still incur damages from such schemes in the future. We believe that the implementation of extensive employee telework practices has increased our cybersecurity risks. The theft, unauthorized use or publication of our intellectual property and/or confidential business information could harm our competitive position, reduce the value of our investment in research and development and other strategic initiatives or otherwise adversely affect our business. To the extent that any security breach results in inappropriate disclosure of our customers’ or licensees’ confidential information, we may incur liability as a result. Any future attacks which may disrupt our IT systems, or those of our suppliers, could impact our sales, financial results and stock price. In response to these risks, we expect to continue to devote additional resources to the security of our information technology systems.

Third parties may violate our proprietary rights and we may incur litigation costs to protect our proprietary rights.

We rely on patent, copyright, trademark and trade secret laws to establish and maintain proprietary rights in our technology and products. Any of our proprietary rights may expire due to patent life, or be challenged, invalidated or circumvented. We are also subject to the theft and misappropriation of our intellectual property by others, including incidents relating to former employees. Additionally, instances where we identify third parties potentially infringing on our proprietary rights may require our further investigation that could be time-consuming and costly. We believe that our company is taking reasonable actions to protect and continuously improve our security, through strengthened IT infrastructure and internal controls, but if these actions are not successful our business could be adversely affected.

Other parties may claim that we are infringing upon their intellectual property rights, and we could suffer litigation or licensing costs, and be prohibited from selling our products.

We may receive notice from our competitors and third parties regarding patent or copyright claims of potential infringement by our company. Any such claims, with or without merit, could be time-consuming to defend, result in costly litigation, divert management’s attention and resources, and cause us to incur significant expenses. In the event of a successful claim of infringement against us, it may be costly for us to obtain licensing rights, or we may fail to obtain licensing rights or have an inability to license the infringed technology. Additionally, we may not be able to timely acquire or develop similar non-infringing technology, which may require us to change our products or processes. In each of these instances, our business, financial condition and results of operations could be adversely affected.

Item 1B. Unresolved Staff Comments.

None.

Item 2. Properties.

Certain information concerning our principal properties at December 31, 2022, is set forth below:

Major activities have been separated into the following categories: 1. Corporate Administration/Principal Executive Offices and Global Headquarters, 2. Sales, Service and Customer Support, 3. Manufacturing, 4. Engineering and Product Development, and 5. Marketing, Finance and General Administration

In addition to the locations listed above, we lease other properties primarily for manufacturing, sales, service, engineering, and general administration in various locations. We believe our facilities are suitable for their respective uses and are adequate for our present needs.

Item 3. Legal Proceedings.

See Note 12, “Commitments and Contingencies” in Part IV, Item 15(a) of this Form 10-K for information regarding legal proceedings.

Item 4. Mine Safety Disclosures.

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Cohu, Inc. stock is traded on the Nasdaq Global Select Market under the symbol “COHU”.

Holders

At February 8, 2023, Cohu had 577 stockholders of record. The actual number of stockholders is greater than this number of record holders and includes stockholders who are beneficial owners but whose shares are held in street name by brokers and other nominees. This number of holders of record also does not include stockholders whose shares may be held in trust by other entities.

Dividends

We are proactively managing cash flow and Cohu’s Board of Directors authorized suspending our quarterly cash dividend indefinitely, as of May 5, 2020. The dividend suspension has resulted in approximately $10 million of annualized cash savings, which we are utilizing to deleverage and strengthen our balance sheet. Future reinstatement of our dividend policy may be affected by, among other items, our views on potential future capital requirements, including those related to debt service requirements, research and development, investments and acquisitions, legal risks and stock repurchases.

Recent Sales of Unregistered Securities

During 2022, we did not issue any securities that were not registered under the Securities Act of 1933, as amended.

Issuer Purchases of Equity Securities

On October 28, 2021, we announced that our Board of Directors authorized a $70 million share repurchase program. On October 25, 2022, our Board of Directors authorized an additional $70 million under the share repurchase program. This share repurchase program was effective as of November 2, 2021 and has no expiration date. The timing of share repurchases and the number of shares of common stock to be repurchased will depend upon prevailing market conditions and other factors. Repurchases under this program will be made using our existing cash resources and may be commenced or suspended from time-to-time at our discretion without prior notice. Repurchases may be made in the open market, through 10b5-1 programs, or in privately negotiated transactions at prevailing market rates in accordance with federal securities laws. All such repurchased shares and related costs are held as treasury stock and accounted for at trade date using the cost method. The total number of shares of common stock we purchased during the fiscal year ended December 31, 2022 was 1,767,070 shares.

Share repurchase activity during the fourth quarter of 2022 was as follows:

Equity Compensation Plan Information

The information required by this Item regarding equity compensation plans is incorporated by reference to the information set forth in Part III, Item 12 of this Annual Report on Form 10-K.

Comparative Stock Performance Graph

The information contained in this Stock Performance Graph section shall not be deemed to be “soliciting material” or “filed” with the SEC or subject to the liabilities of Section 18 of the Exchange Act except to the extent that Cohu specifically incorporates it by reference into a document filed under the Securities Act or the Exchange Act.

The graph below compares the cumulative total stockholder return on the common stock of Cohu for the last five fiscal years with the cumulative total return on custom Peer Group Indexes and a Nasdaq Global Select Market Index over the same period (assuming the investment of $100 in Cohu’s common stock, Peer Group Index and Nasdaq Global Select Market Index on December 30, 2017, and reinvestment of all dividends). The custom Peer Group Indexes are comprised of companies within our industry and are utilized in our executive compensation planning process. This peer group is revised annually to reflect acquisitions and to include comparable companies in the semiconductor equipment market to ensure a sufficient number of companies in the peer group composition to enable a meaningful comparison and benchmarking. In 2022, the custom peer group was comprised of Advanced Energy Industries, Inc., Alpha & Omega Semiconductor Limited, Axcelis Technologies, Inc., Badger Meter, Inc., Cirrus Logic, Inc., FormFactor, Inc., Harmonic Inc., Ichor Holdings Ltd., Kulicke and Soffa Industries, Inc., MACOM Technology Solutions Holdings, Inc., MaxLinear, Inc., National Instruments Corporation, Novanta, Inc., Onto Innovation, OSI Systems, Inc., Photronics, Inc., Smart Global Holdings, Inc., Ultra Clean Holdings, Inc. and Veeco Instruments, Inc. In selecting our 2022 peer group the Compensation Committee of our Board of Directors considered competitive market data and an analysis prepared by Compensia and identified companies headquartered in the U.S. in the semiconductor capital equipment and electronic capital equipment and instrumentation sectors that were comparable to us on the basis of revenue, our market capitalization, and that had similar scope of operations. In 2021, the custom Peer Group Index was comprised of Advanced Energy Industries, Inc., Axcelis Technologies, Inc., Azenta, Inc. (formerly Brooks Automation, Inc.), Cirrus Logic, Inc., Entegris, Inc., FormFactor, Inc., Kulicke and Soffa Industries, Inc., Novanta, Inc., OSI Systems, Inc., Onto Innovation, Inc., Photronics, Inc., Synaptics, Inc., Ultra Clean Holdings, Inc. and Veeco Instruments, Inc.

Item 6. Reserved.

We have adopted the amendments to Items 301 and 302 of Regulation S-K contained in SEC Release No. 33-10890. As a result, the disclosure previously provided in Part II, Item 6 is no longer required. There were no retrospective changes to the Consolidated Statements of Operations for any quarters in the two most recent fiscal years that would require disclosure under Item 302, as amended.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

OVERVIEW

Cohu is a leading supplier of semiconductor test and inspection automation systems (handlers), micro-electromechanical system (“MEMS”) test modules, test contactors and thermal subsystems, and semiconductor automated test equipment used by global semiconductor manufacturers and test subcontractors. We offer a wide range of products and services and our revenue from capital equipment products is driven by the capital expenditure budgets and spending patterns of our customers, who often abruptly delay or accelerate purchases in reaction to variations in their business. The level of capital expenditures by these companies depends on the current and anticipated market demand for semiconductor devices and the products that incorporate them. Our consumable products are driven by the number of semiconductor devices that are tested and by the continuous introduction of new products and new technologies by our customers. As a result, our consumable products provide a more stable recurring source of revenue and generally do not have the same degree of cyclicality as our capital equipment products.

For the year ended December 31, 2022, our net sales decreased 8.4% year-over-year to $812.8 million. Although customer test cell utilization rates remain high and we continue to benefit from robust demand for semiconductor test equipment, as compared to the prior year, our net sales declined during 2022 due to lower demand for mobility and 5G-related products as well as the divestiture of our PCB Test business, which contributed $26.8 million in sales during 2021 through its disposition on June 24, 2021. Over the past twelve months, consolidated net sales benefitted from growth in our semiconductor test business, and we saw improvements in gross margin due to favorable product mix, and increased insourcing of contactor manufacturing. Also, price increases offset cost increases in our supply chain. Based on the strength of current business conditions and the results from our operations, we have continued to take actions to reduce outstanding principal under our Term Loan Credit Facility through voluntary prepayments and we have also repurchased 1,767,070 shares of our common stock for $50.7 million during 2022.

We continue to focus on building a well-balanced and resilient business model. Our long-term market drivers and market strategy remain intact, and we are encouraged by demand across our main market segments, along with customer traction with our new products. We continue to capture new customers and remain optimistic about the long-term prospects for our business due to the increasing ubiquity of semiconductors, the continued rollout of 5G networks, increasing semiconductor complexity, increasing quality demands from semiconductor customers, increasing test intensity and continued proliferation of electronics in a variety of products across the automotive, mobility, industrial and consumer markets.

Application of Critical Accounting Estimates and Policies

Our discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We base our estimates on historical experience, forecasts and on various other assumptions that are believed to be reasonable under the circumstances; however actual results may differ from those estimates under different assumptions or conditions. The methods, estimates and judgments we use in applying our accounting policies have a significant impact on the results we report in our financial statements. Some of our accounting policies require us to make difficult and subjective judgments, often as a result of the need to make estimates of matters that are inherently uncertain. Our critical accounting estimates that we believe are the most important to investors’ understanding of our financial results and condition and require complex management judgment include:

Below, we discuss these policies further, as well as the estimates and judgments involved. We also have other policies that we consider key accounting policies; however, these policies typically do not require us to make estimates or judgments that are difficult or subjective.

Revenue Recognition: Our net sales are derived from the sale of products and services and are adjusted for estimated returns and allowances, which historically have been insignificant. We recognize revenue when the obligations under the terms of a contract with our customers are satisfied; generally, this occurs with the transfer of control of our systems, non-system products or the completion of services. In circumstances where control is not transferred until destination or acceptance, we defer revenue recognition until such events occur. Revenue for established products that have previously satisfied a customer’s acceptance requirements is generally recognized upon shipment. In cases where a prior history of customer acceptance cannot be demonstrated or from sales where customer payment dates are not determinable and in the case of new products, revenue and cost of sales are deferred until customer acceptance has been received. Our post-shipment obligations typically include installation and standard warranties. The estimated fair value of installation related revenue is recognized in the period the installation is performed. Service revenue is recognized over time as the transfer of control is completed for the related contract or upon completion of the services if they are short-term in nature. Spares, contactor and kit revenue is generally recognized upon shipment. Certain of our equipment sales have multiple performance obligations. These arrangements involve the delivery or performance of multiple performance obligations, and transfer of control of performance obligations may occur at different points in time or over different periods of time. For arrangements containing multiple performance obligations, the revenue relating to the undelivered performance obligation is deferred using the relative standalone selling price method utilizing estimated sales prices until satisfaction of the deferred performance obligation. Unsatisfied performance obligations primarily represent contracts for products with future delivery dates. At December 31, 2022, and December 25, 2021, we had $7.1 million and $7.7 million of revenue expected to be recognized in the future related to performance obligations that are unsatisfied (or partially unsatisfied) with expected durations of over one year, respectively. As allowed under ASC Topic 606, Revenue from Contracts with Customers (“ASC 606”), we have opted to not disclose unsatisfied performance obligations for contracts with original expected durations of less than one year. We generally sell our equipment with a product warranty. The product warranty provides assurance to customers that delivered products are as specified in the contract (an “assurance-type warranty”). Therefore, we account for such product warranties under ASC Topic 460, Guarantees (“ASC 460”), and not as a separate performance obligation. The transaction price reflects our expectations about the consideration we will be entitled to receive from the customer and may include fixed or variable amounts. Fixed consideration primarily includes sales to customers that are known as of the end of the reporting period. Variable consideration includes sales in which the amount of consideration that we will receive is unknown as of the end of a reporting period. Such consideration primarily includes sales made to certain customers with cumulative tier volume discounts offered. Variable consideration arrangements are rare; however, when they occur, we estimate variable consideration as the expected value to which we expect to be entitled. Included in the transaction price estimate are amounts in which it is probable that a significant reversal of cumulative revenue recognized will not occur when the uncertainty associated with the variable consideration is subsequently resolved. The estimate is based on information available for projected future sales. Variable consideration that does not meet revenue recognition criteria is deferred. Accounts receivable represents our unconditional right to receive consideration from our customer. Payments terms do not exceed one year from the invoice date and therefore do not include a significant financing component. To date, there have been no material impairment losses on accounts receivable. There were no material contract assets recorded on the consolidated balance sheet in any of the periods presented. On shipments where sales are not recognized, gross profit is generally recorded as deferred profit in our consolidated balance sheet representing the difference between the receivable recorded and the inventory shipped.

Accounts Receivable: We maintain an allowance for credit losses for estimated losses resulting from the inability of our customers to make required payments. If the financial condition of our customers deteriorates, resulting in an impairment of their ability to make payments, additional allowances may be required. Our customers include semiconductor manufacturers and semiconductor test subcontractors throughout many areas of the world. While we believe that our allowance for credit losses is adequate and represents our best estimate of future losses we will continue to monitor customer liquidity and other economic conditions, which may result in changes to our estimates.

Inventory: The valuation of inventory requires us to estimate obsolete or excess inventory as well as inventory that is not of saleable quality. The determination of obsolete or excess inventory requires us to estimate the future demand for our products. The demand forecast is a direct input in the development of our short-term manufacturing plans. We record valuation reserves on our inventory for estimated excess and obsolete inventory and lower of cost or net realizable value concerns equal to the difference between the cost of inventory and the estimated realizable value based upon assumptions about future product demand, market conditions and product selling prices. If future product demand, market conditions or product selling prices are less than those projected by management or if continued modifications to products are required to meet specifications or other customer requirements, increases to inventory reserves may be required which would have a negative impact on our gross margin.

Income Taxes: We estimate our liability for income taxes based on the various jurisdictions where we conduct business. This requires us to estimate our (i) current taxes; (ii) temporary differences that result from differing treatment of certain items for tax and accounting purposes and (iii) unrecognized tax benefits. Temporary differences result in deferred tax assets and liabilities that are reflected in the consolidated balance sheet. The deferred tax assets are reduced by a valuation allowance if, based upon all available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. Establishing, reducing or increasing a valuation allowance in an accounting period generally results in an increase or decrease in tax expense in the statement of operations. We must make significant judgments to determine the provision for income taxes, deferred tax assets and liabilities, unrecognized tax benefits and any valuation allowance to be recorded against deferred tax assets. Our gross deferred tax asset balance as of December 31, 2022, was approximately $114.5 million, with a valuation allowance of approximately $89.2 million.

During December 2022, the Organization for Economic Cooperation and Development (OECD) announced that it has reached agreement among its 136-member countries that certain multinational enterprises will be subject to a global minimum tax rate of 15%, also known as Pillar Two. South Korea became the first country to enact such global minimum tax rules, which will be effective for fiscal years beginning on or after January 1, 2024. These specific actions did not impact our consolidated financial statements in 2022, however, many more countries are expected to issue laws and regulations to conform with this guidance soon. We will continue to monitor the pertinent law changes and regulations to determine the impact they would have on our operating and financial results.

Segment Information: We applied the provisions of ASC Topic 280, Segment Reporting (“ASC 280”), which sets forth a management approach to segment reporting and establishes requirements to report selected segment information quarterly and to report annually entity-wide disclosures about products, major customers and the geographies in which the entity holds material assets and reports revenue. An operating segment is defined as a component that engages in business activities whose operating results are reviewed by the chief operating decision maker and for which discrete financial information is available. We have determined that our three identified operating segments are: Test Handler Group (“THG”), Semiconductor Tester Group (“STG”) and Interface Solutions Group (“ISG”). Our THG, STG and ISG operating segments qualify for aggregation under ASC 280 due to similarities in their customers, their economic characteristics, and the nature of products and services provided. As a result, we report in one segment, Semiconductor Test and Inspection Equipment (“Semiconductor Test & Inspection”). Prior to the sale of our PCB Test Group (“PTG”) on June 24, 2021, we reported in two segments, Semiconductor Test & Inspection and PCB Test Equipment (“PCB Test”).

Goodwill and Indefinite-Lived Intangibles, Other Intangible Assets and Long-lived Assets: We evaluate goodwill and other indefinite-lived intangible assets, which are solely comprised of in-process research and development (“IPR&D”), for impairment annually and when an event occurs or circumstances change that indicate that the carrying value may not be recoverable. We test goodwill for impairment by first comparing the book value of net assets to the fair value of the reporting unit or asset, in the case of in-process research and development. If the fair value is determined to be less than the book value, a second step is performed to compute the amount of impairment as the difference between the fair value of the reporting unit and it’s carrying value of goodwill. We estimated the fair values of our reporting units using a weighting of the income and market approaches. Under the income approach, we use a discounted cash flow methodology to derive an indication of value, which requires management to make significant estimates and assumptions related to forecasted revenues, gross profit margins, operating income margins, working capital cash flow, perpetual growth rates, and long-term discount rates, among others. For the market approach, we use the guideline public company method. Under this method we utilize information from comparable publicly traded companies with similar operating and investment characteristics as the reporting units, to create valuation multiples that are applied to the operating performance metrics of the reporting unit being tested, in order to obtain an indication of value. We then apply a 50/50 weighting to the indicated values from the income and market approaches to derive the fair values of the reporting units. Forecasts of future cash flows are based on our best estimate of future net sales and operating expenses, based primarily on customer forecasts, industry trade organization data and general economic conditions. Fair value determinations require considerable judgment and are sensitive to changes in underlying assumptions and factors.

We conduct our annual impairment test as of October 1st of each year, and have determined there was no impairment as of October 1, 2022, as we determined that the estimated fair values of our reporting units exceeded their carrying values on that date. Other events and changes in circumstances may also require goodwill to be tested for impairment between annual measurement dates. As of December 31, 2022, we do not believe that circumstances have occurred that indicate impairment of our goodwill is more-likely-than-not. In the event we determine that an interim goodwill impairment review is required in a future period, the review may result in an impairment charge, which would have a negative impact on our results of operations.

During the first quarter of 2020, the volatility in Cohu’s stock price, the global economic downturn and business interruptions associated with the COVID-19 pandemic led us to determine that there was a triggering event related to goodwill within all of our identified reporting units and our indefinite-lived intangible assets. We performed an interim assessment as of March 28, 2020 and determined that the fair values of our identified reporting units all exceeded their carrying values and we concluded there was no impairment of goodwill within our reporting units. Anticipated delays in customer adoption of certain new products under development as a result of the COVID-19 pandemic, changes to future project roadmaps and an increase in the discount rate used in the developing our interim fair value estimate resulted in a $3.9 million impairment to IPR&D recorded during the first quarter as the carrying value exceeded fair value. During the third quarter of 2020, we became aware of additional delays in customer adoption of the same new products under development leading us to re-evaluate the fair value of these projects and we determined that the carrying value exceeded the fair value and, as a result, we recorded a $7.3 million impairment to IPR&D. For the twelve months ended December 26, 2020 total impairments recorded to IPR&D projects was $11.2 million. During the fourth quarter of 2021 we completed and transferred to developed technology our last remaining in-process technology project which was reviewed for impairment as part of this process. Due to a change in forecasted results an impairment charge of $0.1 million was recorded.

Long-lived assets, other than goodwill, are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of the assets might not be recoverable. Conditions that would necessitate an impairment assessment include a significant decline in the observable market value of an asset, a significant change in the extent or manner in which an asset is used, or any other significant adverse change that would indicate that the carrying amount of an asset or group of assets may not be recoverable. For long-lived assets, impairment losses are only recorded if the asset’s carrying amount is not recoverable through its undiscounted future cash flows. We measure the impairment loss based on the difference between the carrying amount and estimated fair value.

Warranty: We provide for the estimated costs of product warranties in the period sales are recognized. Our warranty obligation estimates are affected by historical product shipment levels, product performance and material and labor costs incurred in correcting product performance problems. Should product performance, material usage or labor repair costs differ from our estimates, revisions to the estimated warranty liability would be required.

Contingencies: We are subject to certain contingencies that arise in the ordinary course of our businesses which require us to assess the likelihood that future events will confirm the existence of a loss or an impairment of an asset. If a loss or asset impairment is probable and the amount of the loss or impairment is reasonably estimable, we accrue a charge to operations in the period such conditions become known.

Share-based Compensation: Share-based compensation expense related to restricted stock unit awards is calculated based on the market price of our common stock on the grant date, reduced by the present value of dividends expected to be paid on our common stock prior to vesting of the restricted stock unit. Share-based compensation on performance stock units with market-based goals is calculated using a Monte Carlo simulation model on the date of the grant. Share-based compensation expense related to stock options is recorded based on the fair value of the award on its grant date, which we estimate using the Black-Scholes valuation model.

Our estimate of share-based compensation expense requires a number of complex and subjective assumptions and the assumptions used in calculating the fair value of share-based awards represent our best estimates, but these estimates involve inherent uncertainties and the application of management judgment. Although we believe the assumptions and estimates we have made are reasonable and appropriate, changes in assumptions could materially impact our reported financial results.

Recent Accounting Pronouncements: For a description of accounting changes and recent accounting pronouncements, including the expected dates of adoption and estimated effects, if any, on our consolidated financial statements, see Note 1, “Recent Accounting Pronouncements” in Part IV, Item 15(a) of this Form 10-K.

RESULTS OF OPERATIONS

Recent Transactions Impacting Results of Operations

On June 24, 2021, we completed the sale of our PCB Test business. Due to the timing of the divestment of this business our results for 2021 include our PCB Test business for the six months ended June 24, 2021, whereas our results for the period ended December 26, 2020 include this business for the full twelve months. Previously, management determined that the fixtures services business, that was acquired as part of Xcerra, did not align with Cohu’s long-term strategic plan and management divested this business in February 2020. The operating results of our fixtures business are presented as “discontinued operations” for the periods ended December 31, 2022, December 25, 2021 and December 26, 2020. Unless otherwise indicated, the discussion below covers the comparative results from continuing operations.

The following table summarizes certain operating data as a percentage of net sales:

Please refer to “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Part II, Item 7 in our 2021 Annual Report on Form 10-K, filed with the SEC on February 18, 2022, for comparative discussion of our fiscal years ended December 25, 2021 and December 26, 2020.

2022 Compared to 2021

Net Sales

Cohu’s consolidated net sales decreased 8.4% from $887.2 million in 2021 to $812.8 million in 2022. During 2022, although customer test cell utilization rates remained high and we continued to benefit from robust demand for semiconductor test equipment, as compared to 2021, net sales declined due to lower demand for mobility and 5G-related products as well as the divestiture of our PCB Test business, which contributed $26.8 million in sales during 2021 through its disposition on June 24, 2021. During 2021 our net sales were favorably impacted by robust automotive demand, driven by xEV and ADAS technologies, strength in industrial markets, and continued mobility expansion with 5G proliferation. Demand for equipment testing 5G, Wi-Fi 6 and Ultra-Wideband devices, data centers, personal computers and automotive semiconductor and sensors were at near record levels.

Gross Margin (exclusive of amortization of acquisition-related intangible assets described below)

Gross margin consists of net sales less cost of sales (excluding the impact of amortization of developed technology). Cost of sales consists primarily of the materials, assembly and test labor and overhead from operations. Our gross margin can fluctuate due to a number of factors, including, but not limited to, the mix of products sold, product support costs, increases to inventory reserves, the sale of previously reserved inventory and business volume which impacts the utilization of our manufacturing capacity. Our gross margin, as a percentage of net sales, increased to 47.2% in 2022 from 43.6% in 2021. During 2022 our gross margin improved compared to 2021 due to favorable product mix, increased insourcing of contactor manufacturing and foreign currency fluctuations.

We compute the majority of our excess and obsolete inventory reserve requirements using inventory usage forecasts. During 2022, we recorded net charges to cost of sales of approximately $7.2 million for excess and obsolete inventory. In 2021, net charges to cost of sales for excess and obsolete inventory were $7.1 million. We believe our reserves for excess and obsolete inventory and lower of cost or net realizable value are adequate to cover known exposures at December 31, 2022. Reductions in customer forecasts, continued modifications to products, our failure to meet specifications or other customer requirements may result in additional charges to operations that could negatively impact our gross margin in future periods.

Research and Development Expense (“R&D Expense”)

R&D expense consists primarily of salaries and related costs of employees engaged in ongoing research, product design and development activities, costs of engineering materials and supplies and professional consulting expenses. Our future operating results depend, to a considerable extent, on our ability to maintain a competitive advantage in the products we provide, and historically we have maintained our commitment to investing in R&D in order to be able to continue to offer new products to our customers. R&D expense in 2022 was $92.6 million, or 11.4% of net sales, compared to $92.0 million, or 10.4% of net sales in 2021. R&D expense in 2021 includes the results of our PCB Test business, which incurred $1.5 million of costs prior to its disposition on June 24, 2021. During 2022 R&D expense increased due to higher spending on labor and materials associated with product development.

Selling, General and Administrative Expense (“SG&A Expense”)

SG&A expense consists primarily of salaries and benefit costs of employees, commission expense for independent sales representatives, product promotion and costs of professional services. SG&A expense as a percentage of net sales increased to 16.2% in 2022, from 14.3% in 2021, increasing from $127.0 million in 2021 to $131.4 million in 2022. SG&A expense in 2021 includes the results of our PCB Test business, which incurred $3.3 million of SG&A expense prior to its disposition on June 24, 2021. During 2022 SG&A expense has increased due to higher labor and professional services costs.

Amortization of Purchased Intangible Assets

Amortization of purchased intangibles is the process of expensing the cost of an intangible asset acquired through a business combination over the projected life of the asset. Amortization of acquisition-related intangible assets was $33.2 million and $35.4 million for 2022 and 2021, respectively. The decrease in expense recorded during 2021 was a result of fluctuations in exchange rates and the sale of PCB Test business on June 24, 2021 as remaining purchased intangible assets that were being amortized were written-off as part of the sale.

Gain on sale of PCB Test Business

On June 24, 2021, we completed the divestment of our PCB Test business which resulted in a gain of $70.8 million in 2021. As part of the transaction we also sold certain intellectual property held by our Semiconductor Test & Inspection segment that is utilized by the PCB Test business. Our decision to sell this non-core business resulted from management’s determination that that the PCB test business was no longer a fit within our organization.

Restructuring Charges

Subsequent to the merger with Xcerra in the fourth quarter 2018, we began a strategic restructuring program designed to reposition our organization and improve our cost structure as part of our targeted integration plan regarding Xcerra. In connection with the integration plan, we recorded restructuring charges totaling $0.6 million and $1.8 million in 2022 and 2021, respectively. The decrease in expense year-over-year is a result of fewer activities under the restructuring projects.

See Note 4, “Restructuring Charges” in Part IV, Item 15(a) of this Form 10-K for additional information with respect to restructuring charges.

Impairment Charges

During the fourth quarter of 2021 we completed and transferred to developed technology our last remaining in-process technology project which we tested for impairment as part of this process. A change in forecasted results of this project led to an impairment charge of $0.1 million being recorded in the fourth quarter of 2021.

Interest Expense and Income

Interest expense was $4.2 million in 2022 compared to $6.4 million in 2021. The year-over-year decrease in our interest expense resulted from a reduction in the outstanding balance of our Term Loan Credit Facility.

Interest income was $4.0 million and $0.2 million in 2022 and 2021, respectively. The increase in interest income year-over-year is a result of increased investments and higher rates.

Foreign Transaction Gain (Loss) and Other

We have operations in foreign countries and conduct business in the local currency in these countries. Starting in the fourth quarter of 2020, we began entering into foreign currency forward contracts to hedge against future movements in foreign exchange rates that affect certain U.S. Dollar denominated assets and liabilities that are held at our subsidiaries whose functional currency is the local currency. During both 2022 and 2021, the U.S. Dollar strengthened against the Swiss Franc, Euro and Japanese Yen resulting in foreign currency gains. During 2022 we recognized gains of $1.6 million, net of $5.4 million of losses generated by our foreign currency forward contracts and in 2021 we recognized gains of $0.4 million, net of $3.4 million of losses generated by our foreign currency forward contracts.

See Note 7 “Derivative Financial Instruments” in Part IV, Item 15(a) of this Form 10-K for additional information with respect to our foreign currency forward contracts.

Income Taxes

The income tax provision expressed as a percentage of pre-tax income or loss in 2022 and 2021 was 23.6% and 13.0%, respectively. The increase in the provision for income taxes from 2021 to 2022 is primarily related to the changes in our jurisdictional mix of income, offset by lower GILTI inclusion and foreign tax withholdings and other factors.

Companies are required to assess whether a valuation allowance should be recorded against their deferred tax assets (“DTAs”) based on the consideration of all available evidence, using a “more likely than not” realization standard. The four sources of taxable income that must be considered in determining whether DTAs will be realized are, (1) future reversals of existing taxable temporary differences (i.e. offset of gross deferred tax assets against gross deferred tax liabilities); (2) taxable income in prior carryback years, if carryback is permitted under the tax law; (3) tax planning strategies and (4) future taxable income exclusive of reversing temporary differences and carryforwards.

In assessing whether a valuation allowance is required, significant weight is to be given to evidence that can be objectively verified. We have evaluated our DTAs at each reporting period, including an assessment of our cumulative income or loss over the prior three-year period and future periods, to determine if a valuation allowance was required.

Based on the evidence available including a lack of sustainable earnings and history of expiring unused NOLs, and tax credits, we continue to maintain our judgement that a previously recorded valuation allowance against substantially of our net deferred tax assets in the United States is still required. If a change in judgement regarding this valuation allowance were to occur in the future, we will record a potentially material deferred tax benefit, which could result in a favorable impact on the effective tax rate in that period.

Our valuation allowance on our DTAs at December 31, 2022, and December 25, 2021, was approximately $89.2 million and $76.3 million, respectively. The remaining gross DTAs for which a valuation allowance was not recorded are realizable primarily through future reversals of existing taxable temporary differences and to a lesser extent future taxable income in certain jurisdictions exclusive of reversing temporary differences and carryforwards.

For a full reconciliation of our effective tax rate to the U.S. federal statutory rate and further explanation of our provision for income taxes, see Note 9, “Income Taxes”, included in Part IV, Item 15(a) of this Form 10-K, which is incorporated herein by reference.

Net Income

As a result of the factors set forth above, our net income was $96.8 million in 2022 and $167.3 million in 2021.

LIQUIDITY AND CAPITAL RESOURCES

Our business is dependent on capital expenditures by semiconductor manufacturers and test subcontractors that are, in turn, dependent on the current and anticipated market demand for semiconductors. The seasonal and volatile nature of demand for semiconductor equipment, our primary industry, makes estimates of future revenues, results of operations and net cash flows difficult.

Our primary historical source of liquidity and capital resources has been cash flow generated by operations and we manage our business to maximize operating cash flows as our primary source of liquidity. We use cash to fund growth in our operating assets and to fund new products and product enhancements primarily through research and development. As of December 31, 2022, $154.5 million or 40.1% of our cash, cash equivalents and short-term investments was held by our foreign subsidiaries. If these funds are needed for our operations in the U.S., we may be required to accrue and pay foreign withholding taxes if we repatriate these funds. Except for working capital requirements in certain jurisdictions, we provide for all withholding and other residual taxes related to unremitted earnings of our foreign subsidiaries.

At December 31, 2022, our total indebtedness, net of discount and deferred financing costs, was $79.0 million, which included $66.2 million outstanding under the Term Loan Credit Facility, $2.5 million outstanding under Kita’s term loans, $8.4 million outstanding under Cohu GmbH’s construction loans, and $1.9 million outstanding under Kita’s lines of credit.

In March 2021, we closed an underwritten follow-on public offering totaling 5,692,500 shares of our common stock at $41.00 per share, raising net proceeds of approximately $223.1 million, after deducting underwriting discounts and commissions and offering expenses. We used $100.0 million of the net proceeds of this offering to repay outstanding principal on our Term Loan Credit Facility and we intend to use the rest for general corporate purposes, including to fund future growth initiatives. On June 30, 2021, we prepaid an additional $100.0 million of our Term Loan Credit Facility utilizing a portion of the net proceeds from the sale of our PCB Test business. In 2022, we repurchased 1,767,070 shares of our outstanding common stock for $50.7 million to be held as treasury stock.

We believe that our sources of liquidity will be sufficient to satisfy our anticipated cash requirements through at least the next 12 months. Our liquidity could be negatively affected by a decrease in demand for our products. In addition, we may make acquisitions or increase our capital expenditures and may need to raise additional capital through debt or equity financing to provide for greater flexibility to fund these activities. Additional financing may not be available or not available on terms favorable to us. A discussion of cash flows for the year ended December 26, 2020 has been omitted from this Annual Report on Form 10-K, but may be found in “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations,” under the heading “Liquidity and Capital Resources” in our Annual Report on Form 10-K for the year ended December 25, 2021, filed with the SEC on February 18, 2022, which discussion is incorporated herein by reference and which is available free of charge on the SEC’s website at www.sec.gov.

Liquidity

Working Capital: The following summarizes our cash, cash equivalents, short-term investments and working capital at December 31, 2022 and December 25, 2021:

Cash Flows

Operating Activities: Cash provided by operating activities consists of our net income adjusted for non-cash expenses and changes in operating assets and liabilities. These adjustments include impairment charges, depreciation expense on property, plant and equipment, share-based compensation expense, amortization of intangible assets, deferred income taxes, amortization of cloud-based software implementation costs, loss on extinguishment of debt, interest capitalized associated with cloud computing implementation, amortization of debt discounts and issuance costs and gains from the sale of our PCB Test business and property, plant and equipment. Our net cash flows provided by operating activities in 2022 totaled $112.9 million compared to $97.9 million in 2021. Cash provided by operating activities in the current year was a result of an increase in net income as compared to a net loss in the prior year. Cash provided by operating activities was also impacted by changes in current assets and liabilities which included decreases in accounts payable and accounts receivable. The timing of payments to our suppliers resulted in the $33.1 million decrease in accounts payable, and net sales in the fourth quarter of 2022 and the timing of the resulting cash conversion cycle drove the $12.5 million decrease in accounts receivable. Deferred profit decreased $5.0 million as a result of the recognition of revenue that had been previously deferred in accordance with our revenue recognition policy, and accrued compensation, warranty and other liabilities decreased $4.0 million due to lower business volume resulting in lower rates of accrual. Cash provided by operating activities was also impacted by increases in income taxes payable of $20.9 million a result of higher income tax to be paid in certain jurisdictions. During 2022, inventories increased $18.5 million due to purchases from suppliers made in the fourth quarter to fulfill anticipated future shipments of product, and other current assets increased $16.2 million due to income tax prepayments and supplier advance deposits for inventory that will be received over the next twelve months.

Investing Activities: Investing cash flows consist primarily of cash used for capital expenditures in support of our business, purchases of investments, business acquisitions and proceeds from investment maturities, asset disposals and business divestitures. Our net cash used in investing activities in 2022 totaled $67.9 million. In 2022 we used $208.9 million in cash for purchases of short-term investments and generated $155.4 million from sales and maturities. We invest our excess cash, in an attempt to seek the highest available return while preserving capital, in short-term investments since excess cash may be required for a business-related purpose. Additions to property, plant and equipment in 2022 were $14.8 million and were made to support our operating and development activities. Our net cash provided by investing activities in 2021 totaled $39.9 million. In 2021 we used $12.0 million for additions to property, plant and equipment and we used $204.7 million in cash for purchases of short-term investments and generated $135.5 million from sales and maturities. Our net cash provided by investing activities in 2021 also included the net cash proceeds of $120.9 million from the sale of our PCB Test business on June 24, 2021. The decision to sell our PCB Test business resulted from Cohu management’s determination that this industry segment was not a fit within our organization and we could utilize the proceeds from the sale business to reduce outstanding debt and invest in growth opportunities in line with our core business strategy.

Financing Activities: Financing cash flows consist primarily of net proceeds from the issuance of common stock from an underwritten public offering and under our stock option and employee stock purchase plans and repayments of debt, net of new borrowings. In fiscal 2022, our cash used in financing activities totaled $91.1 million. In fiscal 2021, our cash provided by financing activities totaled $6.5 million. In March 2021, we closed an underwritten public offering totaling 5,692,500 shares of our common stock at $41.00 per share, raising net proceeds of approximately $223.1 million, after deducting underwriting discounts and commissions and offering expenses. Repayments of short-term borrowings and long-term debt during 2022 totaled $38.2 million, which includes $31.7 million of cash prepayments of our Term Loan Credit Facility. During 2021 our repayments totaled $206.1 million and included $200.0 million of cash prepayments of our Term Loan Credit Facility using proceeds from our underwritten public offering and the sale of our PCB Test business to deleverage our balance sheet. In 2021, we received proceeds under a revolving line of credit and construction loan totaling $1.4 million. Proceeds from the construction loan was used to expand our facility in Kolbermoor, Germany, enabling us to consolidate the German operations of our Semiconductor Test & Inspection segment. Proceeds from the revolving line of credit are being used to increase the manufacturing capacity of our Semiconductor Test & Inspection segment facility located in Osaka, Japan. During 2022 and 2021, we made payments totaling $50.7 million and $7.3 million, respectively for shares of our common stock repurchased under our share repurchase program to be held as treasury stock. We issue restricted stock units, stock options and maintain an employee stock purchase plan as components of our overall employee compensation. In 2022, cash used to settle the minimum statutory tax withholding requirements on behalf of our employees upon vesting of restricted and performance stock awards, net of proceeds from shares issued under our employee stock purchase plan and from the exercise of employee stock options was $2.0 million. In 2021, net cash used to settle the minimum statutory tax withholding requirements on behalf of our employees totaled $4.4 million. The decrease in cash used to settle tax withholding requirements between 2022 and 2021 is directly correlated to the decrease in Cohu’s stock price at the end of March year over year when the majority of awards vest.

Share Repurchase Program

On October 28, 2021, we announced that our Board of Directors authorized a $70 million share repurchase program. On October 25, 2022, our Board of Directors authorized an additional $70 million under the share repurchase program. This share repurchase program was effective as of November 2, 2021, and has no expiration date. The timing of share repurchases and the number of shares of common stock to be repurchased will depend upon prevailing market conditions and other factors. Repurchases under this program will be made using our existing cash resources and may be commenced or suspended from time-to-time at our discretion without prior notice. Repurchases may be made in the open market, through 10b5-1 programs, or in privately negotiated transactions at prevailing market rates in accordance with federal securities laws. For the year ended December 31, 2022, we repurchased 1,767,070 shares of our common stock for $50.7 million to be held as treasury stock. As of December 31, 2022, we may purchase up to $82.0 million of shares of our common stock under our share repurchase program.

Capital Resources

We have access to credit facilitates and other borrowings provided by financial institutions to finance acquisitions, capital expenditures and our operations if needed. A summary of our borrowings and available credit is as follows.

Credit Agreement

On October 1, 2018, we entered into a Credit Agreement providing for a $350.0 million Term Loan Credit Facility and borrowed the full amount to finance a portion of the Xcerra acquisition. Loans under the Term Loan Credit Facility amortize in equal quarterly installments of 0.25% of the original principal amount, with the balance payable at maturity. All outstanding principal and interest in respect of the Term Loan Credit Facility must be repaid on or before October 1, 2025. The loans under the Term Loan Credit Facility bear interest, at Cohu’s option, at a floating annual rate equal to LIBOR plus a margin of 3.00%. At December 31, 2022, the outstanding loan balance, net of discount and deferred financing costs, was $66.2 million and $3.2 million of the outstanding balance is presented as current installments of long-term debt in our consolidated balance sheets. At December 25, 2021, the outstanding loan balance, net of discount and deferred financing costs, was $101.6 million and $10.1 million of the outstanding balance is presented as current installments of long-term debt in our consolidated balance sheets. As of December 31, 2022, the fair value of the debt was $66.6 million. The measurement of the fair value of debt is based on the average of the bid and ask trading quotes as of December 31, 2022 and is considered a Level 2 fair value measurement.

Under the terms of the Credit Agreement, the lender may accelerate the payment terms upon the occurrence of certain events of default set forth therein, which include: the failure of Cohu to make timely payments of amounts due under the Credit Agreement, the failure of Cohu to adhere to the representations and covenants set forth in the Credit Agreement, the failure to provide notice of any event that causes a material adverse effect or to provide other required notices, upon the event that related collateral agreements become ineffective, upon the event that certain legal judgments are entered against Cohu, the insolvency of Cohu, or upon the change of control of Cohu. As of December 31, 2022, we believe no such events of default have occurred.

During 2022, we prepaid $31.8 million in principal of our Term Loan Credit Facility for $31.7 million in cash. We accounted for the prepayment as a debt extinguishment, which resulted in a loss of $0.3 million reflected in our consolidated statement of operations and a $0.4 million reduction in debt discounts and deferred financing costs in our consolidated balance sheets. During 2021, we repurchased $200.0 million in principal of our Term Loan Credit Facility for $200.0 million in cash. We accounted for the repurchase as a debt extinguishment, which resulted in a loss of $3.4 million reflected in our consolidated statement of operations, as well as a $3.4 million reduction in debt discounts and deferred financing costs in our consolidated balance sheets. Approximately $67.0 million in principal of the Term Loan Credit Facility remains outstanding as of December 31, 2022.

Kita Term Loans

As a result of our acquisition of Kita, we assumed term loans from a series of Japanese financial institutions primarily related to the expansion of Kita’s facility in Osaka, Japan. The loans are collateralized by the facility and land, carry interest rates ranging from 0.05% to 0.43%, and expire at various dates through 2034. At December 31, 2022, the outstanding loan balance was $2.5 million and $0.2 million of the outstanding balance is presented as current installments of long-term debt in our consolidated balance sheets. At December 25, 2021, the outstanding loan balance was $3.1 million and $0.2 million of the outstanding balance is presented as current installments of long-term debt in our consolidated balance sheets. The term loans are denominated in Japanese Yen and, as a result, amounts disclosed herein will fluctuate because of changes in currency exchange rates.

Construction Loans

In July 2019 and June 2020, one of our wholly owned subsidiaries located in Germany entered into a series of construction loans (“Loan Facilities”) with a German financial institution providing it with total borrowings of up to €10.1 million. The Loan Facilities are being utilized to finance the expansion of our facility in Kolbermoor, Germany and are secured by the land and the existing building on the site. The Loan Facilities bear interest at agreed upon rates based on the facility amounts as discussed below.

The first facility totaling €3.4 million has been fully drawn and is payable over 10 years at a fixed annual interest rate of 0.8%. Principal and interest payments are due each quarter over the duration of the facility ending in September 2029. The second facility totaling €5.2 million has been fully drawn and is payable over 15 years at an annual interest rate of 1.05%, which is fixed until April 2027. Principal and interest payments are due each month over the duration of the facility ending in January 2034. The third facility totaling €0.9 million has been fully drawn and is payable over 10 years at an annual interest rate of 1.2%. Principal and interest payments are due each month over the duration of the facility ending in May 2030.

At December 31, 2022, total outstanding borrowings under the Loan Facilities was $8.4 million with $1.0 million of the total outstanding balance being presented as current installments of long-term debt in our consolidated balance sheets. At December 25, 2021, total outstanding borrowings under the Loan Facilities was $10.0 million with $1.0 million of the total outstanding balance being presented as current installments of long-term debt in our consolidated balance sheets. The loans are denominated in Euros and, as a result, amounts disclosed herein will fluctuate because of changes in currency exchange rates. The fair value of the debt approximates the carrying value at December 31, 2022.

Lines of Credit

As a result of our acquisition of Kita, we assumed a series of revolving credit facilities with various financial institutions in Japan. The credit facilities renew monthly and provide Kita with access to working capital totaling up to 960 million Japanese Yen of which 250 million Japanese Yen is drawn. At December 31, 2022, total borrowings outstanding under the revolving lines of credit were $1.9 million. As these credit facility agreements renew monthly, they have been included in short-term borrowings in our consolidated balance sheets.

The revolving lines of credit are denominated in Japanese Yen and, as a result, amounts disclosed herein will fluctuate because of changes in currency exchange rates.

Our wholly owned subsidiary in Switzerland has one available line of credit which provides it with borrowings of up to a total of 2.0 million Swiss Francs, a portion of which is reserved for tax guarantees. At December 31, 2022 and December 25, 2021, no amounts were outstanding under this line of credit.

We also have a letter of credit facility (“LC Facility”) under which Bank of America, N.A., has agreed to administer the issuance of letters of credit on our behalf. The LC Facility requires us to maintain deposits of cash or other approved investments in amounts that approximate our outstanding letters of credit and contains customary restrictive covenants. In addition, our wholly owned subsidiary, Xcerra, has arrangements with various financial institutions for the issuance of letters of credit and bank guarantees. As of December 31, 2022, $0.3 million was outstanding under standby letters of credit and bank guarantees.

We expect that we will continue to make capital expenditures to support our business and we anticipate that present working capital will be sufficient to meet our operating requirements for at least the next twelve months.

Contractual Obligations

The following table summarizes our significant contractual obligations at December 31, 2022, and the effect such obligations are expected to have on our liquidity and cash flows in future periods. Amounts excluded include our liability for unrecognized tax benefits that totaled approximately $33.4 million at December 31, 2022. We are currently unable to provide a reasonably reliable estimate of the amount or period(s) the cash settlement of this liability may occur.

The table above does not include pension, post-retirement benefit and warranty obligations because it is not certain when these liabilities will be funded. For additional information regarding our pension and post-retirement benefits obligations see Note 6, “Employee Benefit Plans” and for more information on our contractual obligations, see Note 13, “Guarantees” in Part IV, Item 15(a) of this Form 10-K.

Commitments to contract manufacturers and suppliers. From time-to-time, we enter into commitments with our vendors and outsourcing partners to purchase inventory at fixed prices or in guaranteed quantities. We are not able to determine the aggregate amount of such purchase orders that represent contractual obligations, as purchase orders may represent authorizations to purchase rather than binding agreements. Our purchase orders are based on our current manufacturing needs and are fulfilled by our vendors within relatively short time horizons. We typically do not have significant agreements for the purchase of raw materials or other goods specifying minimum quantities or set prices that exceed our expected requirements for the next three months.

Off-Balance Sheet Arrangements. During the ordinary course of business, we provide standby letters of credit instruments to certain parties as required. As of December 31, 2022, $0.3 million was outstanding under standby letters of credit.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Investment and Interest Rate Risk.

At December 31, 2022, our investment portfolio included short-term, fixed-income investment securities with a fair value of approximately $143.2 million, and we did not hold or issue financial instruments for trading purposes. These securities are subject to interest rate risk and will likely decline in value if interest rates increase. Our future investment income may fall short of expectations due to changes in interest rates or we may suffer losses in principal if we are forced to sell securities that decline in market value due to changes in interest rates. As we classify our short-term securities as available-for-sale, no gains or losses are recognized due to changes in interest rates unless such securities are sold prior to maturity or declines in fair value are determined to be other-than-temporary. Due to the relatively short duration of our investment portfolio, an immediate ten percent change in interest rates would have no material impact on our financial condition or results of operations.

We evaluate our investments periodically for possible other-than-temporary impairment by reviewing factors such as the length of time and extent to which fair value has been below cost basis, the financial condition of the issuer and our ability and intent to hold the investment for a period of time sufficient for anticipated recovery of market value. As of December 31, 2022, the cost and fair value of investments with loss positions were approximately $86.3 million and $85.5 million, respectively. We evaluated the nature of these investments, credit worthiness of the issuer and the duration of these impairments and concluded that these losses were temporary and we have the ability and intent to hold these investments to maturity.

Our long-term debt is carried at amortized cost, and fluctuations in interest rates do not impact our consolidated financial statements. However, the fair value of our debt will generally fluctuate with movements of interest rates, increasing in periods of declining rates of interest and declining in periods of increasing rates of interest. As of December 31, 2022, we have approximately $67.0 million of long-term debt due under a Term Loan Credit Facility that is subject to quarterly interest payments that are based on either a base rate plus a margin of up to 2.0% per annum, or the London Interbank Offered Rate (“LIBOR”) plus a margin of up to 3.0% per annum. The selection of the interest rate formula is at our discretion. The interest rate otherwise payable under the Term Loan Credit Facility would be subject to increase by 2.0% per annum during the continuance of a payment default and may be subject to increase by 2.0% per annum with respect to the overdue principal amount of any loans outstanding and overdue interest payments and other overdue fees and amounts. At December 31, 2022, the interest rate in effect on these borrowings was 6.37%.

In July 2017, the UK’s Financial Conduct Authority (“FCA”), which regulates the LIBOR, announced that it intended to phase out LIBOR by the end of 2021. In March 2021, the FCA announced an extension of the phase out in the case of U.S. dollar settings for certain tenors until the end of June 2023. Various central bank committees and working groups continue to discuss replacement of benchmark rates, the process for amending existing LIBOR-based contracts, and the potential economic impacts of different alternatives. It is unclear whether new methods of calculating LIBOR will be established such that it continues to exist after 2023. While the U.S. Federal Reserve, in conjunction with the Alternative Reference Rates Committee, has chosen the secured overnight financing rate (“SOFR”) as the recommended risk-free reference rate for the U.S, we cannot currently predict the extent to which this index will gain widespread acceptance as a replacement for LIBOR. We cannot currently predict the effect of the discontinuation of, or other changes to, LIBOR or any establishment of alternative reference rates in the United States, the European Union or elsewhere on the global capital markets. The uncertainty regarding the future of LIBOR, as well as the transition from LIBOR to any alternative reference rate or rates, could have adverse impacts on floating rate obligations, loans, deposits, derivatives and other financial instruments that currently use LIBOR as a benchmark rate. Our Term Loan Credit Facility constitutes our most significant exposure to this transition and there is no guarantee that a shift from LIBOR to a new reference rate will not result in increases to our borrowing costs.

Foreign Currency Exchange Risk.

We have operations in several foreign countries and conduct business in the local currency in these countries. As a result, we have risk associated with currency fluctuations as the value of foreign currencies fluctuate against the U.S. dollar, in particular the Swiss Franc, Euro, Malaysian Ringgit, Chinese Yuan, Philippine Peso and Japanese Yen. These fluctuations can impact our reported earnings.

During the fourth quarter of 2020, we began entering into foreign currency forward contracts with a financial institution to hedge against future movements in foreign exchange rates that affect certain existing U.S. Dollar denominated assets and liabilities at our subsidiaries whose functional currency is the local currency. Under this program, our strategy is to have increases or decreases in our foreign currency exposures mitigated by gains or losses on the foreign currency forward contracts in order to mitigate the risks and volatility associated with foreign currency transaction gains or losses.

Fluctuations in currency exchange rates also impact the U.S. Dollar amount of our net investment in foreign operations. The assets and liabilities of our foreign subsidiaries are translated into U.S. Dollars at the exchange rates in effect at the fiscal year-end balance sheet date. Income and expense accounts are translated at an average exchange rate during the year which approximates the rates in effect at the transaction dates. The resulting translation adjustments are recorded in stockholders’ equity as a component of accumulated other comprehensive loss. As a result of fluctuations in certain foreign currency exchange rates in relation to the U.S. Dollar as of December 31, 2022 compared to December 25, 2021, our stockholders’ equity decreased by $18.0 million as a result of the foreign currency translation.

Based upon the current levels of net foreign assets, a hypothetical 10% devaluation of the U.S. dollar as compared to these currencies as of December 31, 2022 would result in an approximate $34.2 million positive translation adjustment recorded in other comprehensive income within stockholders’ equity. Conversely, a hypothetical 10% appreciation of the U.S. dollar as compared to these currencies as of December 31, 2022 would result in an approximate $34.2 million negative translation adjustment recorded in other comprehensive income within stockholders’ equity.

Item 8. Financial Statements and Supplementary Data.

The information required by this Item is included in Part IV, Item 15(a).

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

None.

The accompanying notes are an integral part of these statements.